Worcestershire · England
Bath re-enamelling & resurfacing in Ryall, Worcestershire
Full bath re-enamelling and resurfacing in Ryall, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes most of the day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Make sure the area is dry
- Keep a parking space free if you can
How to get a price
If you’re in Ryall and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Bath re-enamelling in Ryall without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on basins & shower trays, cast iron baths and acrylic baths, and the jobs we see most are a roll-top that’s seen better days and brown or grey marks that don’t clean off.
We stand behind the work with a one-year guarantee.
- Where
- Ryall (WR8)
- County
- Worcestershire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Ryall: your questions answered
Are there extra charges for Ryall?
No. Our quotes include travel, with the same prices everywhere we work.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Repair or replace in Ryall?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why us?
- CHAS and Constructionline accredited
- Same prices wherever you are
- Fixed prices from your photos
- One-year guarantee on every repair
Read our pricing and guide to resurfacing and replacement costs.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Covering Ryall
Ryall is about 6 miles north-west of Tewkesbury, in Worcestershire. From the centre of Ryall to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Ryall is one of 376 places in Worcestershire we cover. We work right across the region, from Ryall to Birmingham (about 31 miles away).
Our technicians cover all of WR8. Whether you live on Ryall Road, Hillview Gardens and The Woodlands or anywhere nearby, we can come to you. Nearby, we also work in Upton upon Severn (1 mile south-west), Hanley Castle (1 mile north-west), Longdon Heath (2 miles south-west), The Hook (2 miles west) and Severn Stoke (2 miles north). We also work in nearby towns such as Worcester (9 miles north), Great Malvern (6 miles north-west), Droitwich Spa (14 miles north), Evesham (11 miles east), Pershore (6 miles north-east) and Malvern (6 miles north-west).
Local landmarks in Ryall
Our customers here include homes close to Upton-upon-Severn CofE Primary School, Church of St Nicholas and Hanley Castle High School, among other places. Other landmarks nearby include British National Fencing Museum (3.3 miles north-west). For a walk, there is Brotheridge Green Nature Reserve.
Prices and what affects them
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How much damage there is
- Whether we combine several jobs
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
How to look after the repair
Once the work has cured, treat it gently:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Towns and villages near Ryall
What else we do in Ryall
Do you need bath re-enamelling in Ryall?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
People typically call us when they notice something like this:
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A roll-top that is seen better days
- An old resurfacing that is failing
Comparing quotes
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether a trained technician does the job
- Aftercare advice
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
