County Durham · England
Bath re-enamelling & resurfacing in Sacriston, County Durham
Bath re-enamelling in and around Sacriston: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A roll-top that’s seen better days
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our bath re-enamelling in Sacriston
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a dull, rough surface that won’t come clean and a coloured bath you want in white, in Victorian roll-tops, cast iron baths and basins & shower trays.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Sacriston (DH7)
- Area hub
- County Durham
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Why book with us
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- No extra charge for your area
- CHAS and Constructionline accredited
Read our pricing and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether old repairs or coatings need taking off
- What the surface is made of
- The type of damage
- Doing more than one item at once
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
You can usually get a fixed quote without us visiting. To make it quick:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- What it’s made of, if you know
For a price in Sacriston, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
The process
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Nearby places to Sacriston
Other services in Sacriston
Landlord and trade work in Sacriston
We work for landlords, letting agents and housing providers in Sacriston as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Common questions in Sacriston
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your DH7 postcode.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there any odour?
There may be a mild smell during the work.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Sacriston and the surrounding area
Sacriston is about 3 miles south-west of Chester-le-Street, in County Durham. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover 329 places across County Durham, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 12 miles away.
Every address in DH7 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Water Street, Oakwood Close and Elliott Street. You’ll find Sacriston on the B6312 and B6532, so it’s easy for us to reach. Close by, we cover Witton Gilbert (1 mile south-west), Nettlesworth (1 mile east), Edmondsley (1 mile north), Holmside (2 miles north-west) and Waldridge (2 miles north). Further out, we also cover Durham (3 miles south-east), Consett (9 miles west), Newton Aycliffe (14 miles south), Bishop Auckland (12 miles south), Spennymoor (8 miles south) and Seaham (11 miles east).
What’s near Sacriston
In Sacriston, that means homes near The Old Church, Sacriston Academy and Fyndoune Community College. The nearest railway station is Chester-Le-Street station, roughly 3.1 miles north-east. A little further out are Durham Castle (3.7 miles south-east) and Ushaw Historic House (2.6 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
