Vale of Glamorgan · Wales
Bath re-enamelling & resurfacing in Saint Andras, Vale of Glamorgan
Problem with your bath in Saint Andras? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
Do you need bath re-enamelling in Saint Andras?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- An old resurfacing that is failing
- An outdated colour you’d like to change
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
Before you book anyone
- If travel is included in the price
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
Bath re-enamelling in Saint Andras, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s worn patches where water runs and sits and a coating lifting around the plughole, we can normally put it right, whatever the material.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Saint Andras (CF64)
- Region
- Vale of Glamorgan
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Saint Andras
More services for Saint Andras
Keeping it looking good
Aftercare is simple:
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Ensure the area is dry
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
What we can’t put right
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Saint Andras: your questions answered
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
About Saint Andras
Saint Andras (Welsh: St Andrews Major) is about 2 miles north-east of Barry, in the Vale of Glamorgan. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 67 places across the Vale of Glamorgan, from the larger towns to small villages.
All of CF64 is within our area. We also travel to Westra (1 mile south-east), Pencoedtre (1 mile south-west), Dinas Powys (1 mile east), Michaelston-le-Pit (1 mile north-east) and Wenvoe (1 mile north-west). We also work in nearby towns such as Penarth (3 miles east), Llantwit Major (11 miles west), Cowbridge (9 miles west), Cwm Talwg (3 miles south-west), Lower Penarth (3 miles east) and Romilly (3 miles south-west).
Around Saint Andras
Locally, our jobs take us to homes close to Church Of St Andrew, St Andrews Major C.I.W. Primary School and The Star Inn. The closest station to Saint Andras is Dinas Powys station, about 1 mile east. Well-known places in the area include Beauville Castle (0.5 miles north) and Mermaid Quay (3.8 miles north-east). Green spaces nearby include Cosmeston Lakes (West) and T. G. Tibbetts.
Repairing versus replacing in Saint Andras
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Saint Andras clients choose us
- Everything repaired in place
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
Take a look at our pricing or bath cost comparison.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What affects the price in Saint Andras
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The colour and finish to match
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- A picture taken from further back
- The material, if you know it
- A close-up of the damage, in focus
- Where you are, by postcode
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
