Brighton and Hove · England

Bath re-enamelling & resurfacing in Saltdean, Brighton and Hove

Local bath re-enamelling for Saltdean: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Saltdean?

How we handle bath re-enamelling in Saltdean

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s brown or grey marks that don’t clean off and wear marks under the taps, we can help, whatever the material.

Whatever the size of the job, it’s backed by a one-year guarantee in Saltdean and across Brighton and Hove.

Stained basin resurfaced to clean white (before and after)
Area
Saltdean (BN2)
Region
Brighton and Hove
Cover
12 months on all our work
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

How the visit works

Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Preparing for the visit

  • Open a window if you can
  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed quote

Advice

What bath re-enamelling costs

Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:

  • Access to the area
  • Whether we combine several jobs
  • How much damage there is
  • Whether it’s a chip, crack, burn or wear

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

Two or three clear pictures are generally enough. Try to include:

  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus
  • A picture taken from further back

For a price in Saltdean, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

About Saltdean

Saltdean is about 1 mile west of Telscombe, in Brighton and Hove. Whether you’re in the middle of Saltdean or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 30 towns and villages in Brighton and Hove, from the larger towns to small villages. Our nearest city page is London, about 48 miles away.

Every address in BN2 is covered. Jobs here include addresses on Hill Road, School Lane and Lynwood Road. If you are just outside Saltdean, we cover East Saltdean (1 mile east), Rottingdean (1 mile north-west), Telscombe (1 mile east), Ovingdean (2 miles north-west) and Roedean (3 miles west). Within a short drive, we also cover Brighton (4 miles north-west), Brighton and Hove (7 miles west), Hove (6 miles west), Carlton Hill (4 miles west), Hanover (4 miles north-west) and West Hill (5 miles west).

Landmarks near Saltdean

Typical jobs here are in homes near St Nicholas, Queen Victoria pub and Longhill High School, among other places. You will also find Beacon Hill (1.1 miles west) and Saltdean Primary School (under half a mile north). The nearest railway station is Southease station, roughly 3.7 miles north-east. A little further out are French Convalescent Home (3 miles west) and Brighton Motor Museum (3.5 miles west). Green spaces nearby include Beacon Hill Local Nature Reserve and Newmarket Hill.

Map of Saltdean © OpenStreetMap contributors

For landlords and businesses

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Common problems we fix in Saltdean

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Clients usually contact us about:

  • A bath in a colour that no longer suits
  • Lots of chips and rust spots
  • Staining under the taps and around the waste
  • A bath that stays dull however much you clean it

Comparing quotes

  • What protection goes down before work starts
  • The length of the guarantee and what it covers
  • A fixed price, and whether VAT is included
  • How long it needs to cure

How to compare quotes

Repairing versus replacing in Saltdean

A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • Colours mixed by hand to suit your surface
  • No need to remove anything
  • Every repair guaranteed for a year
  • We will tell you if it’s not worth repairing

See our full price list and guide to resurfacing and replacement costs.

FAQs for Saltdean

How long does re-enamelling last?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

Is there a call-out fee?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is there any odour?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

Aftercare tips

So the finish stays in good condition for years:

  • A quick wipe after use keeps limescale away
  • Have chips seen to early
  • Repair dripping taps early
  • Stick to gentle, non-abrasive cleaners

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.