Kent · England

Bath re-enamelling & resurfacing in Sandhurst, Kent

Full bath re-enamelling and resurfacing in Sandhurst, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Sandhurst

Repair or replace in Sandhurst?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why us?

  • Colour-matched on site
  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your pictures
  • Work done at your home or business

See our prices page and bath cost comparison.

Bath re-enamelling in Sandhurst without replacing anything

The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with a coloured bath you want in white and staining under the taps and around the waste, we can usually put it right.

Whatever the size of the job, you get the same one-year guarantee in Sandhurst and across Kent.

Stained basin resurfaced to clean white (before and after)
Where
Sandhurst (TN18)
Region
Kent
Cover
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

What happens on the day

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can typically be used the next day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Let us know about parking or access

Getting a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed quote

Advice

Repairs by material

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Signs you need bath re-enamelling in Sandhurst

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

You may need us if you’ve spotted any of these:

  • Lots of chips and rust spots
  • An outdated colour you’d like to change
  • An original cast iron bath that needs restoring
  • Brown or grey marks that do not clean off

Comparing quotes

  • If travel is included in the price
  • The length of the guarantee and what it covers
  • How soon you can use it again
  • A fixed quote, and whether VAT is included

How to compare quotes

Our work in Sandhurst

Sandhurst is about 11 miles north of Hastings, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Sandhurst is one of 922 towns and villages in Kent where we work. Our jobs stretch from Sandhurst to London (43 miles away).

We work across the TN18 postcode area. We regularly work on streets such as Bodiam Road, Poundfield Road and Queen Street. Neighbouring places we cover include Sandhurst Cross (1 mile south-west), Linkhill (1 mile east), Four Throws (2 miles north-west), Little Conghurst (2 miles north-west) and Bodiam (2 miles south-west). Within a short drive, we also cover Ashford (15 miles north-east), Royal Tunbridge Wells (15 miles north-west), Paddock Wood (13 miles north-west), Tenterden (6 miles north-east), Park Wood (15 miles north) and Staplehurst (10 miles north).

Local landmarks in Sandhurst

Around Sandhurst, we work in homes near Sandhurst Primary School, Sentido pub and Mission Church. For rail, the closest station is Robertsbridge station, roughly 4.9 miles south-west of the centre. Further afield, we also cover the area around The C.M Booth Collection (3.5 miles north-east) and Benenden Hospital (4.8 miles north-east).

Map of Sandhurst © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

For landlords and businesses

If you manage property in Sandhurst, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.

We work for landlords, letting agents and housing providers in Sandhurst as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Do not leave a chip unrepaired
  • A dripping tap should be fixed promptly
  • Clean with a soft cloth and mild detergent
  • Do not use the bath until it has fully cured

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.

What we cannot put right

We will always be straight with you, so here’s what a repair will not do:

  • Anything hidden under an old coating, until we remove it
  • Leaks from fittings rather than the bath
  • A cast iron or steel bath that’s cracked right through

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Sandhurst

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

Sandhurst questions

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Kent.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.

How much does bath re-enamelling cost in Sandhurst?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.