Ceredigion · Wales
Bath re-enamelling & resurfacing in Saron, Ceredigion
Bath re-enamelling across Saron and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
Signs you need bath re-enamelling in Saron
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
- Several chips and rust patches
Questions to ask before booking
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- If travel is included in the price
About our bath re-enamelling in Saron
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix chips and rust in more than one place and a bath that stays dull however much you clean it, across basins & shower trays, pressed steel baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Saron (SA44)
- County
- Ceredigion
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- The material and finish
- Unusual colours or finishes
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- Natural light rather than flash
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A wider photo showing the entire bath
Send us a photo of the damage and a wider shot of the entire item, with your SA44 postcode, and we’ll come back with a fixed quote.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs right away
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Landlord and trade work in Saron
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Saron as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Nearby places to Saron
Other services in Saron
FAQs for Saron
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you cover the entire of Ceredigion?
Across the UK, and that includes Saron. Our prices are the same everywhere.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.
The process
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Ensure the area is dry
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Where we work around Saron
Saron is about 11 miles north of Carmarthen, in Ceredigion. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Saron is one of 125 towns and villages in Ceredigion we cover.
We work across the SA44 postcode area and the streets around it. From Hafod Hedd and Trewern or a nearby road, a technician can come to you. If you’re just outside Saron, we cover Pentre-cwrt (1 mile north-east), Llangeler (1 mile north), Drefach (1 mile north-west), Henllan (2 miles north-west) and Glyncaled (2 miles north-west). Larger places within reach include Aberteifi (13 miles west), Lampeter (14 miles north-east), Bridgend (13 miles west), New Quay (14 miles north), Llandudoch (14 miles west) and Llandysul (3 miles north-east).
Near you in Saron
Locally, our jobs take us to homes close to Llwyndafydd Inn. Nearby you will also find Castell Waun-Withan (0.6 miles south) and West Wales Museum of Childhood (1.3 miles north-west). Green spaces nearby include Pen Gilfachgynyddion.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
