Hampshire · England

Bath re-enamelling & resurfacing in Selborne, Hampshire

Problem with your bath in Selborne? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Selborne

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Repair dripping taps early
  • Don’t leave a chip unrepaired
  • Dry the bath after use to stop limescale
  • Rinse off hair dye, oils and bath bombs right away

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

Bath re-enamelling at your home in Selborne

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a peeling or bubbling previous coating and chips and rust in more than one place, across basins & shower trays, acrylic baths and cast iron baths.

A one-year guarantee comes as standard, so you are covered after the visit.

Roll-top bath being refinished by a Surface Doctor technician
Location
Selborne (GU34)
County
Hampshire
Cover
One year on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Work for landlords and builders

If you manage property in Selborne, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

About Selborne

Selborne is about 4 miles south of Alton, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Selborne to London (about 46 miles away).

All of GU34 is covered. Whether you live on Huckers Lane, Ganders Close and Selborne Road or anywhere nearby, a technician can come to you. Other places close to Selborne include Newton Valence (1 mile west), Empshott (2 miles south-east), Lower Green (3 miles south), Hawkley (3 miles south) and Oakshott (4 miles south). Within a short drive, we also cover Basingstoke (13 miles north-west), Fleet (13 miles north), Horndean (14 miles south), Aldershot (13 miles north-east), Alton (4 miles north) and Waterlooville (15 miles south).

Near you in Selborne

Around Selborne, we work in homes near Selborne Church of England Primary School, The Jubilee Tap and Church of St Mary. The nearest railway station is Alton station, about 3.8 miles north of the centre. Further afield, we also cover the area around The Romany Museum (under half a mile south-east) and Alton Community Hospital (3.5 miles north-west). Green spaces nearby include Selborne Hill and Deadwater Valley.

Map of Selborne © OpenStreetMap contributors

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

How the visit works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Preparing for the visit

  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access
  • Tell us if there are stairs or a lift

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed price

Advice

Your questions about bath re-enamelling in Selborne

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed price includes everything.

What areas do you cover?

Everywhere in the UK, Selborne included. Travel is included in the price.

Will there be fumes?

A little, during the work. We set up ventilation and the smell fades as it cures.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can pets and children be at home?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What we are called out for in Selborne

Often the bath has just had decades of use. The body of the bath is normally perfectly sound.

Look out for any of the following:

  • A roll-top that is seen better days
  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off
  • An outdated colour you’d like to change

Questions to ask before you book

  • Whether there are any call-out or travel charges
  • Whether cleaning and preparation are in the price
  • How long it needs to cure
  • Who will actually do the work

10 questions to ask before you book

Should you replace it?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Selborne

  • A year’s guarantee on all work
  • A fixed quote before booking
  • Technicians who travel to you, UK-wide
  • Nothing taken out or refitted

Take a look at our prices page and guide to resurfacing and replacement costs.

What we cannot put right

Before booking, it’s worth knowing the limits too:

  • An acrylic bath that flexes badly underfoot
  • Holes rusted through the metal
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.