Kent · England
Bath re-enamelling & resurfacing in Sepham Heath, Kent
Full bath re-enamelling and resurfacing for homes and businesses in Sepham Heath and across Kent. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coating lifting around the plughole
- An outdated colour you’d like to change
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Bath re-enamelling at your home in Sepham Heath
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s a roll-top that’s seen better days and stains that won’t shift, we can help, on acrylic baths, Victorian roll-tops and basins & shower trays alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Sepham Heath (TN14)
- Region
- Kent
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Sepham Heath
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- How many items we do on one visit
- Unusual colours or finishes
- How much damage there is
- Access to the area
Our prices are the same across the UK, with no extra for Sepham Heath. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- The postcode, so we can plan the visit
- Natural light rather than flash
- Something in shot to show the size
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Nearby places to Sepham Heath
More services for Sepham Heath
Questions from Sepham Heath
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Do you cover Sepham Heath?
We do. We send a technician to Sepham Heath for every job, and the price is the same as everywhere else.
How much does bath re-enamelling cost in Sepham Heath?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
What we can’t put right
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Sepham Heath
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Our work in Sepham Heath
Sepham Heath is about 3 miles north-west of Sevenoaks, in Kent. Anywhere in TN14, we carry out the work at your property. Sepham Heath is one of 922 places in Kent where we work. You can also see our page for London, about 16 miles away.
We work across TN14. Nearby, we also work in Halstead (1 mile north-west), Twitton (1 mile south-east), Badgers Mount (1 mile north), Knockholt Pound (1 mile south-west) and Shoreham (1 mile north-east). Within a short drive, we also cover Dartford (9 miles north), Sevenoaks (3 miles south-east), Royal Tunbridge Wells (14 miles south), Gravesend (12 miles north-east), Tonbridge (10 miles south-east) and Northfleet (11 miles north-east).
Local landmarks in Sepham Heath
Our clients here include homes close to Halstead Community Primary School, Polhill Bank and Crown Cottages The Rose And Crown Public House and the streets around them. Sepham Heath’s nearest station is Knockholt station, about 1.7 miles north-west. Nearby you will also find Lullingstone Castle (3.1 miles north-east) and Sevenoaks Hospital (3.1 miles south-east). Open spaces near Sepham Heath include Betsom's Hill and Dryhill Nature Reserve.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
What you get with us
- Colour mixed on the day to match
- No need to remove anything
- Honest advice, even when it means no job
- We leave the room as we found it
Take a look at our full price list and bath cost comparison.
Common problems we fix in Sepham Heath
Many baths we resurface have simply been well used. The body of the bath is typically perfectly sound.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- A coating lifting around the plughole
- Worn patches where water runs and sits
What to look for in a quote
- Who turns up on the day
- How soon you can use it again
- What prep work is covered
- The length of the guarantee and what it covers
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
