Somerset · England
Bath re-enamelling & resurfacing in Shalford, Somerset
We travel to Shalford for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Store bottles off the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Shalford without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s a coloured bath you want in white and lots of chips and rust spots, we can usually put it right, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Shalford (BA9)
- County
- Somerset
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Nearby places to Shalford
Other services in Shalford
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day. Before we go, we will explain how long to leave it and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Let the surface dry out before the visit
Get a quote
For a price in Shalford, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When we’d advise against a repair
A repair is not right for every job, for example:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Covering Shalford
Shalford is about 11 miles south of Frome, in Somerset. Whether you are in the middle of Shalford or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Jobs in BA9 work the same way as everywhere else we cover. Nearby, we also work in Stoney Stoke (1 mile north-west), Wincanton (2 miles south), Shepton Montague (3 miles west), Bratton Seymour (3 miles west) and Pitcombe (3 miles north-west). We also work in nearby towns such as Yeovil (14 miles south-west), Frome (11 miles north), Wells (14 miles north-west), Midsomer Norton (15 miles north), Shepton Mallet (10 miles north-west) and Street (15 miles west).
Local landmarks in Shalford
Around Shalford, we work in homes near The Smithy Inn, King Arthur's Community School and Church of Saint Stephen and the streets around them. For rail, the closest station is Bruton station, about 3 miles north-west of the centre. Well-known places in the area include Ballands Castle (2 miles east) and Four Towers (1.5 miles north-east). For a walk, there’s Aaron's Hill.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Shalford
- Free fixed quotes from pictures
- Normally one visit, start to finish
- No extra charge for your area
- Every repair guaranteed for a year
See our prices page and resurfacing vs replacement cost guide.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
FAQs for Shalford
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Shalford. The price reflects:
- Unusual colours or finishes
- The material and finish
- How many areas need work
- Doing more than one item at once
The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
