Kent · England
Bath re-enamelling & resurfacing in Sheet Hill, Kent
Full bath re-enamelling and resurfacing in Sheet Hill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How easy the damage is to reach
- The type of damage
- The colour and finish to match
- Doing more than one item at once
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A photo taken from further back
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
If you’re in Sheet Hill and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Bath re-enamelling at your home in Sheet Hill
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for an original cast iron bath that needs restoring and worn patches where water runs and sits, in pressed steel baths, basins & shower trays and acrylic baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Sheet Hill (TN15)
- Area hub
- Kent
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Sheet Hill
Other services in Sheet Hill
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Looking after it afterwards
Aftercare is simple:
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Respect the curing time we give you
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Sheet Hill
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
FAQs for Sheet Hill
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What happens next?
You will get a fixed quote back, plus dates. There is no obligation to book.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How much does bath re-enamelling cost in Sheet Hill?
Prices start from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Where we work around Sheet Hill
Sheet Hill is about 5 miles east of Sevenoaks, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for London, about 23 miles away.
Here we cover the TN15 postcode area. From Bewley Lane and Sheet Hill or a nearby road, a technician can come to you. We also travel to Yopps Green (1 mile south-east), Ivy Hatch (1 mile west), Ightham (1 mile north-west), Oldbury (1 mile north-west) and Shipbourne (2 miles south). Larger places within reach include Maidstone (10 miles east), Dartford (12 miles north), Sevenoaks (5 miles west), Royal Tunbridge Wells (9 miles south), Gravesend (12 miles north) and Tonbridge (5 miles south).
Near you in Sheet Hill
Typical jobs here are in homes near The Plough Public House, Plaxtol Church and Plaxtol Primary School, among other places. Nearby too are Wrotham School (2.3 miles north) and Ivy Hatch Nature Reserve (0.8 miles west). The nearest railway station is Borough Green & Wrotham station, roughly 1.7 miles north. Well-known places in the area include Beechin Wood Archery Museum (2 miles north-east) and Sevenoaks Hospital (4.4 miles west).
Repair or replace in Sheet Hill?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why Sheet Hill customers choose us
- Dust sheets down, tidy finish
- One price list for the entire UK
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
See our pricing and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Sheet Hill
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
