Calderdale · England

Bath Re-enamelling in Shore

Problem with your bath in Shore? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Shore

How we price bath re-enamelling

Resurfacing from £350. We charge the same across the UK, including Shore. What changes the price is:

  • The colour and finish to match
  • The type of damage
  • How much damage there is
  • Access to the area

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send photos for a quote

You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:

  • Any details about the material
  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage

For a price in Shore, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

About our bath re-enamelling in Shore

Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with a coloured bath you want in white and chips and rust in more than one place, we can typically put it right.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.

Roll-top bath being refinished by a Surface Doctor technician
Area
Shore (OL14)
Region
Calderdale
Warranty
A year, on every repair
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

How it works

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Point us to the nearest place to park
  • Mention if the room is upstairs or in a flat
  • Make sure the room can be ventilated

How to get a price

Most clients in Shore get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send pictures for a quote

Advice

Common problems we fix in Shore

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

If you can see any of these, send us a photo:

  • A bath in a colour that no longer suits
  • A peeling or bubbling previous coating
  • Chips and rust in more than one place
  • Worn patches where water runs and sits

What your quote should include

  • Aftercare advice
  • What happens if the damage is worse than the photos show
  • What protection goes down before work starts
  • A fixed price, and whether VAT is included

Our hiring checklist

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through
  • Plumbing leaks, which need a plumber

Send us photos and we’ll tell you honestly.

Materials we repair

  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops

Should you replace it?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Straight answers about what a repair can do
  • Fixed prices from your photos
  • CHAS, Constructionline and SafeContractor accredited
  • Rooms protected and left tidy

Read our full price list or guide to resurfacing and replacement costs.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Covering Shore

Shore is about 2 miles north-west of Todmorden, in Calderdale. From the centre of Shore to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover 129 places across Calderdale, from the larger towns to small villages. You can also see our page for Manchester, about 18 miles away.

Our technicians cover all of OL14. You’ll find streets such as Shore Green, Pudding Lane and Shaw Lane, and we cover them all. Other places close to Shore include Pudsey (1 mile south-west), Hawks Stones (1 mile north-east), Cornholme (1 mile south-west), Portsmouth (1 mile south-west) and Clough Foot (2 miles south). Further out, we also cover Halifax (10 miles east), Brighouse (14 miles east), Elland (12 miles east), Lee Mount (11 miles east), Hebden Bridge (5 miles east) and Pellon (10 miles east).

Around Shore

Around Shore, we work in homes near Shore Baptist Church And Sunday School, Cornholme Junior and Todmorden High School, among other places. The nearest railway station is Todmorden station, roughly 2.1 miles south-east. A little further out are Todmorden Toy & Model Museum (2.2 miles south-east) and Stansfield View Hospital (3.5 miles south-east). The countryside around Shore includes Stoodley Pike and Rowley Lake.

Map of Shore © OpenStreetMap contributors

Work for landlords and builders

For anyone letting property in or around Shore, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Common questions in Shore

What areas do you cover?

All of Calderdale, and the rest of the UK. Travel is included in the price.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Is a repair better than a new one?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Can a failed resurfacing be redone?

In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.

What information do you need?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.