Cheshire East · England
Bath re-enamelling & resurfacing in Snelson, Cheshire East
Bath re-enamelling in Snelson without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
How we handle bath re-enamelling in Snelson
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on cast iron baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about a coloured bath you want in white and stains that won’t shift.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Location
- Snelson (SK11, WA16)
- Region
- Cheshire East
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Related advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Whether we combine several jobs
- What the surface is made of
- How hard the colour is to match
- How much damage there is
The price reflects the work involved, not where you live. The full price is agreed before you book.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
If you are in Snelson and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What we are called out for in Snelson
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Customers normally contact us about:
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
Before you book anyone
- How soon you can use it again
- How your room will be protected
- What happens if they find more damage
- Whether the price covers travel
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Do not let dyes or oils sit on the finish
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Cheshire East and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Common questions in Snelson
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Repairing versus replacing in Snelson
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Snelson customers choose us
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- No extra charge for your area
- One visit for most repairs
Take a look at our pricing or resurfacing vs replacement cost guide.
Where we work around Snelson
Snelson is about 4 miles south-east of Knutsford, in Cheshire East. Whether you’re in the middle of Snelson or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 254 places across Cheshire East. Our jobs stretch from Snelson to Manchester (15 miles away).
All of SK11 and WA16 is covered, from the main roads to the quietest streets. From Pepper Street, Common Lane and Mill Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Chelford (1 mile north-east), Little Warford (2 miles north), Great Warford (2 miles north-east), Withington Green (2 miles south) and Dean Green (2 miles north-east). Larger places within reach include Crewe (13 miles south-west), Macclesfield (7 miles east), Congleton (8 miles south-east), Wilmslow (5 miles north-east), Knutsford (4 miles north-west) and Middlewich (8 miles south-west).
Landmarks near Snelson
Around Snelson, we work in homes near All Saints Church, The Egerton Arms and Chelford CofE Primary School. The nearest railway station is Chelford station, roughly 0.8 miles east. Nearby you will also find Peover Superior (1.9 miles west) and Knutsford War Memorial Cottage Hospital (3.8 miles north-west). Open spaces near Snelson include Swettenham Meadows Nature Reserve.
What else we do in Snelson
About our accreditations · Every repair comes with a one-year guarantee.
