Kent · England
Bath re-enamelling & resurfacing in South Darenth, Kent
Full bath re-enamelling and resurfacing for homes and businesses in South Darenth and across Kent. Free, fixed quotes from your photos.
- Resurfacing from £350
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
About our bath re-enamelling in South Darenth
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for chips and rust in more than one place and brown or grey marks that don’t clean off, in pressed steel baths, acrylic baths and basins & shower trays.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- South Darenth (DA4)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
The process
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Also near South Darenth
Other services in South Darenth
Questions from South Darenth
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
How long is the bath unusable?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in South Darenth
- One-year guarantee on every repair
- No need to remove anything
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
See our full price list or guide to resurfacing and replacement costs.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Access to the area
- The size and number of damaged areas
- How many items we do on one visit
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- A photo taken from further back
- Whether it’s been repaired or coated before
- Where you are, by postcode
If you are in South Darenth and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What a repair cannot fix
We will always be straight with you, so here’s what a repair cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before booking.
Materials we work on in South Darenth
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in South Darenth, we will quote for several properties at once. Just send photos for each address and we will price them together.
About South Darenth
South Darenth is about 3 miles south of Dartford, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. South Darenth is one of 922 places in Kent where we work. You can also see our page for London, about 16 miles away.
All of DA4 is covered. From East Hill, East Lane and New Road or a nearby road, a technician can come to you. Other places close to South Darenth include St Margarets (1 mile north-east), Sutton at Hone (1 mile north-west), Darenth (1 mile north), Grubb Street (1 mile east) and Green Street Green (1 mile north-east). We also work in nearby towns such as Maidstone (15 miles south-east), Dartford (3 miles north), Sevenoaks (9 miles south), Gravesend (6 miles east), Tonbridge (14 miles south) and Northfleet (5 miles north-east).
Landmarks near South Darenth
Around South Darenth, we work in homes near Horton Kirby Church of England Primary School, The Parish Church of Saint Mary and Leigh Academy, among other places. Nearby too are The Greyhound pub (0.8 miles north-west) and Darenth Country Park (1.9 miles north). For rail, the closest station is Farningham Road station, about 0.6 miles west. Other landmarks nearby include Stone Museum of Geology (2.9 miles north) and Eynsford Castle (2.7 miles south-west). Open spaces near South Darenth include Wansunt Pit and Sawyers Lake.
About our accreditations · Every repair comes with a one-year guarantee.
