Hampshire · England

Bath re-enamelling & resurfacing in Southwick, Hampshire

Local bath re-enamelling for Southwick: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Stains that won’t shift
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Southwick?

How the visit works

On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Make sure the room can be ventilated
  • Move bottles, mats and clutter away from the area

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.

Send photos for a quote

Related advice

About our bath re-enamelling in Southwick

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a roll-top that’s seen better days and a dull, rough surface that won’t come clean, across basins & shower trays, pressed steel baths and Victorian roll-tops.

Whatever the size of the job, it’s backed by a one-year guarantee.

Location
Southwick (PO17)
Area hub
Hampshire
Cover
12 months on all our work
Price
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What we are called out for in Southwick

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

Send us a picture if you notice any of these:

  • Chips and rust in more than one place
  • An outdated colour you’d like to change
  • Stains that will not shift
  • An old resurfacing that’s failing

Comparing quotes

  • How long the guarantee is and what it covers
  • A fixed quote, and whether VAT is included
  • Whether there are any call-out or travel charges
  • How changes to the job are handled

Choosing a repair company

Honest limits

Some jobs aren’t right for a repair, including:

  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we will tell you honestly.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Keeping it looking good

Once the work has cured, treat it gently:

  • Use washing-up liquid and a soft cloth
  • Wipe the bath dry after use in hard water areas
  • Leave the bath for the full curing time before using it
  • Fix dripping taps quickly

Wipe the bath dry after use where you can, and rinse away any product left on the surface.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Repair or replace in Southwick?

A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

What you get with us

  • Colour-matched on site
  • Normally one visit, start to finish
  • Nothing taken out or refitted
  • We leave the room as we found it

Take a look at our pricing and bath cost comparison.

FAQs for Southwick

Can you quote from photos?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

How long will the bath be out of use?

Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What information do you need?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Is there a smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

Covering Southwick

Southwick is about 3 miles west of Purbrook, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 683 places across Hampshire. You can also see our page for London, about 62 miles away.

All of PO17 is covered, from the main roads to the quietest streets. That includes homes on High Street, North Road West and Castle Road. Other places close to Southwick include Boarhunt (1 mile west), North Boarhunt (2 miles north-west), Portchester (2 miles south), Hundred Acres (3 miles north-west) and North Fareham (3 miles west). Within a short drive, we also cover Gosport (5 miles south), Havant (5 miles east), Eastleigh (12 miles north-west), Fareham (4 miles west), Horndean (5 miles north-east) and Chandler's Ford (14 miles north-west).

What’s near Southwick

Typical jobs here are in homes near Red Lion Inn, Church of St James Without the Priory Gate and King Richard School. The closest station to Southwick is Portchester station, roughly 1.9 miles south of the centre. Further afield, we also cover the area around Portchester Castle (2.6 miles south) and Fareham Shopping Centre (3.2 miles south-west). Not far away are Portsdown Hill and St Clair's Meadow.

Map of Southwick © OpenStreetMap contributors

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.