West Berkshire · England
Bath re-enamelling & resurfacing in Speen, West Berkshire
Full bath re-enamelling and resurfacing in Speen, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- An outdated colour you’d like to change
Covering Speen
Speen is about 1 mile north-west of Newbury, in West Berkshire. Jobs in Speen are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Speen is one of 155 places in West Berkshire we cover. We work right across the region, from Speen to London (about 54 miles away).
All of RG14 and RG20 is within our area, from the main roads to the quietest streets. Whether you live on Bath Road, Pound Lane and Speen Lane or anywhere nearby, we can come to you. Other places close to Speen include Bagnor (1 mile north), Speenhamland (1 mile east), Donnington (1 mile north-east), Stockcross (1 mile north-west) and Shaw (1 mile east). Further out, we also cover Thatcham (4 miles east), Burghfield Common (12 miles east), Hungerford (7 miles west), Calcot (13 miles east), Lambourn (11 miles north-west) and Burghfield Hill (13 miles east).
Near you in Speen
Our clients here include homes close to Parish Church of St Mary, The Starting Gate pub and Robert Sandilands Primary School and Nursery and the streets around them. You will also find St Bartholomew's School (1.1 miles south-east), Victoria Park (1.1 miles east) and St Bartholomew's School (1.1 miles south-east). The nearest railway station is Newbury station, roughly 1.2 miles south-east of the centre. Other landmarks nearby include British Balloon Museum & Library Ltd (1.1 miles east) and Donnington Castle (1.1 miles north). For a walk, there’s Rack Marsh.
Bath re-enamelling in Speen, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and the jobs we see most are brown or grey marks that don’t clean off and a coating lifting around the plughole.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Speen (RG14, RG20)
- County
- West Berkshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- We come to you, anywhere in the UK
- A fixed quote before booking
- Everything repaired in place
- A year’s guarantee on all work
Take a look at our prices page or bath cost comparison.
Nearby places to Speen
Also in Speen
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The material and finish
- The type of damage
- Unusual colours or finishes
- Access to the area
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Two or three clear photos are normally enough. It helps if you send:
- One sharp close-up of the damage
- A picture taken from further back
- A coin or ruler next to the damage for scale
- Where you are, by postcode
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
How to look after the repair
Simple care helps the repair last. Our advice:
- Have chips seen to early
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes the best part of a day. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Open a window if you can
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
Common problems we fix in Speen
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
Before you book anyone
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What prep work is covered
- What aftercare is recommended
FAQs for Speen
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Honest limits
We will not take on work that will not last, so here’s what a repair can’t put right:
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Speen
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Speen, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
