West Berkshire · England
Bath Re-enamelling in Lambourn
Damaged bath in Lambourn? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating

Landlords, agents and businesses in Lambourn
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Lambourn, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair acrylic baths, cast iron baths and Victorian roll-tops, and people most frequently call us about wear marks under the taps and a coloured bath you want in white.
Big or small, you get the same one-year guarantee in Lambourn and across West Berkshire.
- Area
- Lambourn (RG17)
- Region
- West Berkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repair or replace in Lambourn?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- Colour-matched on site
- CHAS and Constructionline accredited
- No need to remove anything
- A fixed quote before booking
Read our pricing and resurfacing vs replacement cost guide.
Lambourn: your questions answered
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item with your RG17 postcode.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
- How many areas need work
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
Upload a picture of the damage and one of the whole item, and tell us you’re in Lambourn, and we will reply with a fixed price.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Our work in Lambourn
Lambourn is about 7 miles south-west of Wantage, in West Berkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Lambourn is one of 155 places in West Berkshire where we work. Our nearest city page is London, about 62 miles away.
Postcode districts we cover here: RG17. From High Street, Station Road and Chapel Lane or a nearby road, a technician can come to you. We also travel to Sheepdrove (1 mile north-east), Upper Lambourn (1 mile north-west), Westcot (6 miles north), Sparsholt (6 miles north) and Kingston Lisle (6 miles north). We also work in nearby towns such as Newbury (12 miles south-east), Thatcham (14 miles south-east), Speenhamland (11 miles south-east), Hungerford (7 miles south), Shaw (12 miles south-east) and Wash Common (12 miles south-east). Lambourn is one of the larger places we cover in West Berkshire.
Around Lambourn
Locally, our jobs take us to homes close to Church of St Michael and All Angels, The George pub and Lambourn CofE Primary School, among other places. Open spaces near Lambourn include Watts Bank and Rams Hill.
Nearby places to Lambourn
Other services in Lambourn
Common problems we fix in Lambourn
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Get in touch if you’ve noticed any of these:
- Several chips and rust patches
- A bath in a colour that no longer suits
- Wear marks under the taps
- Staining under the taps and around the waste
Before booking anyone
- Whether the price covers travel
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.

