Cornwall · England
Bath Re-enamelling for St Anthony in Roseland homes
Bath re-enamelling in and around St Anthony in Roseland: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Our work in St Anthony in Roseland
St Anthony in Roseland is about 4 miles east of Falmouth, in Cornwall. Whether you are in the middle of St Anthony in Roseland or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
Postcode districts we cover here: TR2. Close by, we cover St Mawes (1 mile north-west), St Just in Roseland (2 miles north), Mylor Churchtown (3 miles north-west), Gyllyngvase (3 miles west) and Flushing (3 miles west). Larger places within reach include Truro (8 miles north), Falmouth (4 miles west), Camborne (14 miles west), Redruth (12 miles north-west), Helston (12 miles west) and Rosewarne (14 miles west).
Around St Anthony in Roseland
In St Anthony in Roseland, that means homes near St Mawes School, Church of Saint Anthony and Rising Sun pub, among other places. St Anthony in Roseland’s nearest station is Falmouth Docks station, roughly 2.5 miles west. Well-known places in the area include St Mawes Castle (1.1 miles north-west) and Gerrans Parish Heritage Centre (2.2 miles north).
Bath re-enamelling in St Anthony in Roseland, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, we can help, on basins & shower trays, pressed steel baths and acrylic baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- St Anthony in Roseland (TR2)
- Area hub
- Cornwall
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for St Anthony in Roseland. The price reflects:
- How hard the colour is to match
- The material and finish
- Access to the area
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Two or three clear photos are generally enough. It helps if you send:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Natural light rather than flash
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
How it works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Advice
Nearby places to St Anthony in Roseland
Also in St Anthony in Roseland
Landlord and trade work in St Anthony in Roseland
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in St Anthony in Roseland use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Common questions in St Anthony in Roseland
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How do I get a price for bath re-enamelling in St Anthony in Roseland?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Which areas do you work in?
Across the UK. Prices don’t change with location.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Repairing versus replacing in St Anthony in Roseland
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why St Anthony in Roseland clients choose us
- Colour-matched on site
- One visit for most repairs
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our prices page and bath cost comparison.
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
