Cornwall · England
Bath Re-enamelling for St Erth Praze homes
Full bath re-enamelling and resurfacing at your home in St Erth Praze, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Bath re-enamelling in St Erth Praze, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, on cast iron baths, Victorian roll-tops and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- St Erth Praze (TR27)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around St Erth Praze, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Do you need bath re-enamelling in St Erth Praze?
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
People generally call us when they notice one of these:
- Wear marks under the taps
- Chips and rust in more than one place
- Stains that won’t shift
- A dull, rough surface that will not come clean
Comparing quotes
- Whether the colour is mixed to match
- What preparation is included
- Whether the price is fixed and includes VAT
- If travel is included in the price
Our work in St Erth Praze
St Erth Praze is about 5 miles south-west of Camborne, in Cornwall. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 644 places in Cornwall, from the larger towns to small villages.
Postcode districts we cover here: TR27. You will find streets such as Calais Road and Steppy Downs Road, all of which we cover. Other places close to St Erth Praze include Fraddam (1 mile east), Deveral (1 mile east), Calloose (1 mile east), Townshend (2 miles south-east) and Gwinear Downs (2 miles east). Within a short drive, we also cover Falmouth (14 miles east), Camborne (5 miles north-east), Redruth (9 miles north-east), Penzance (7 miles south-west), Helston (7 miles south-east) and St Ives (5 miles north-west).
Landmarks near St Erth Praze
Locally, our jobs take us to homes close to Hayle Recreation Ground, Smugglers Inn and Hayle Academy and the streets around them. St Erth Praze’s nearest station is Hayle station, about 1.7 miles north-west of the centre. Further afield, we also cover the area around Hayle Heritage Centre (1.7 miles north-west) and Acton Castle (4.5 miles south). Green spaces nearby include Marazion Marsh RSPB Reserve and Godolphin Hill.
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let the surface dry out before the visit
- Let us know about parking or access
- Tell us about any previous repairs or coatings
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Also in St Erth Praze
Questions from St Erth Praze
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How do I get a price for bath re-enamelling in St Erth Praze?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your TR27 postcode.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. You are under no obligation.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We take into account:
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Doing more than one item at once
- The material and finish
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Two or three clear photos are usually enough. It helps if you send:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- What it’s made of, if you know
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
When a repair isn’t the answer
We will not take on work that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think.
Materials we work on in St Erth Praze
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Why St Erth Praze clients choose us
- Everything repaired in place
- A fixed quote before you book
- Same prices wherever you are
- Every repair guaranteed for a year
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
