Poole · England

Bath re-enamelling & resurfacing in Stanley Green, Poole

Bath re-enamelling in and around Stanley Green: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Stanley Green

Bath re-enamelling in Stanley Green, done in place

Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with a coating lifting around the plughole and a bath that stays dull however much you clean it, we can help, whatever the material.

All our work is covered by a one-year guarantee, wherever you are in Poole.

Location
Stanley Green (BH15, BH17)
County
Poole
Cover
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Clean with a soft cloth and mild detergent
  • Dry the bath after use to stop limescale
  • A dripping tap should be fixed promptly
  • Rinse off hair dye, oils and bath bombs right away

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Our work in Stanley Green

Stanley Green is about 1 mile west of Poole, in Poole. Customers in Stanley Green get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Stanley Green is one of 18 places in Poole where we work.

Jobs in BH15 and BH17 are booked in the same way as anywhere else. You will find streets such as Hiley Road, Porter Road and Palmer Road, all of which we cover. We also cover the places around Stanley Green: Oakdale (1 mile south-east), Sterte (1 mile south), Waterloo (1 mile north), Longfleet (1 mile south-east) and Poole (1 mile east). Larger places within reach include Alder Hills (3 miles east), Penn Hill (3 miles east), Branksome (3 miles east), Branksome Park (3 miles east), Talbot Woods (4 miles east) and Canford Cliffs (3 miles south-east).

Local landmarks in Stanley Green

In Stanley Green, that means homes near Stanley Green Infant Academy, Poole High School and Poole Park. The closest station to Stanley Green is Poole station, about 1.1 miles south of the centre. Further afield, we also cover the area around Brownsea Castle (3.4 miles south) and Poole (1.3 miles south). For a walk, there’s Beacon Hill and Ham Common (LNR).

Map of Stanley Green © OpenStreetMap contributors

FAQs for Stanley Green

What happens once I’ve sent pictures?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.

What do you need from me?

Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.

Which areas do you work in?

Across the UK, and that includes Stanley Green. Our prices are the same everywhere.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Can you repair several things at once?

Of course, and it usually saves money. Send pictures of everything together and we will quote them together.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Poole.

How the visit works

There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Clear the area around the damage
  • Mention any parking restrictions or tricky access
  • Avoid using the area for a few hours before we arrive

Ask for a price

If you’re in Stanley Green and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Advice

When a repair is not the answer

To be straight with you, there are a few things a repair won’t fix:

  • Leaks from fittings rather than the bath
  • Damage hidden under a previous coating, until it’s stripped back
  • A bath split right through the body

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths

How we price bath re-enamelling

Resurfacing from £350. You will know the full cost before you book. We take into account:

  • How easy the damage is to reach
  • Doing more than one item at once
  • The type of damage
  • Any earlier repairs that need removing first

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • One sharp close-up of the damage
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • Details of any past repairs

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, normally one day. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • No extra charge for your area
  • Free fixed quotes from pictures
  • One-year guarantee on every repair
  • Rooms protected and left tidy

Read our full price list or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.