Poole · England
Bath re-enamelling & resurfacing in Oakdale, Poole
Our repair technicians come to Oakdale for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Bath re-enamelling in Oakdale, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include an old resurfacing that’s failing and chips and rust in more than one place, in acrylic baths, pressed steel baths and cast iron baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Oakdale (BH15, BH17, BH14)
- Area hub
- Poole
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Keeping it looking good
It’s all simple stuff:
- Do not use the bath until it has fully cured
- Repair dripping taps early
- Keep suction mats out of the bath
- Have chips seen to early
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- We will tell you if it’s not worth repairing
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
Take a look at our full price list and bath cost comparison.
Landlord and trade work in Oakdale
If you manage property in Oakdale, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Questions from Oakdale
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
How do I get a price for bath re-enamelling in Oakdale?
Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We will confirm timings when we quote.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Other services in Oakdale
About Oakdale
Oakdale is about 1 mile west of Poole, in Poole. Anywhere in BH15, a technician comes to you. Oakdale is one of 18 towns and villages in Poole where we work.
Jobs in BH15, BH17 and BH14 are booked in the same way as anywhere else. From Hiley Road, Pound Lane and Tatnam Road or anywhere nearby, a technician can come to you. Nearby, we also work in Stanley Green (1 mile north-west), Sterte (1 mile south-west), Longfleet (1 mile south-east), Poole (1 mile east) and Waterloo (1 mile north-west). Within a short drive, we also cover Alder Hills (3 miles east), Branksome (3 miles east), Branksome Park (3 miles east), Talbot Woods (3 miles east) and Canford Cliffs (3 miles south-east).
What’s near Oakdale
We visit homes around Poole Park, Stanley Green Infant Academy and Poole High School. The closest station to Oakdale is Poole station, about 1 mile south of the centre. Other landmarks nearby include Dolphin Shopping Centre (1 mile south) and Poole Hospital (0.8 miles south). Open spaces near Oakdale include Beacon Hill and Ham Common (LNR).
- Local facilities include Poole (1.1 miles south)
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- How easy the damage is to reach
- Unusual colours or finishes
- What kind of damage it is
The price reflects the work involved, not your postcode. The full price is agreed before you book.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
How the visit works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Let us know about parking or access
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Do you need bath re-enamelling in Oakdale?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Clients usually contact us about:
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Comparing quotes
- How to look after the finish
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
