Cheshire East · England
Bath Re-enamelling in Stanthorne
Local bath re-enamelling for Stanthorne: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Stanthorne. The price reflects:
- What kind of damage it is
- How easy the damage is to reach
- Unusual colours or finishes
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Send pictures for a quote
You can typically get a fixed quote without us visiting. To help us price it:
- The material, if you know it
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Natural light rather than flash
If you’re in Stanthorne and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Bath re-enamelling at your home in Stanthorne
We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. We work on acrylic baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about worn patches where water runs and sits and an outdated colour you’d like to change.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Area
- Stanthorne (CW10)
- Region
- Cheshire East
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Stanthorne
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
How to look after the repair
Once the work has cured, treat it gently:
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Don’t use the bath until it has fully cured
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Read more
What we’re called out for in Stanthorne
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Contact us if you’ve noticed any of these:
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- A coating lifting around the plughole
What to look for in a quote
- How the room is protected while they work
- When it can be used again
- Who will actually do the work
- If travel is included in the price
Repair or replace in Stanthorne?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Every repair guaranteed for a year
- Nothing taken out or refitted
- Colour-matched on site
- One price list for the entire UK
See our prices page and resurfacing vs replacement cost guide.
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us photos and we will tell you honestly.
Materials we work on in Stanthorne
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About Stanthorne
Stanthorne is about 1 mile north-west of Middlewich, in Cheshire East. Jobs in Stanthorne are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Stanthorne is one of 254 places in Cheshire East we cover. We work right across the region, from Stanthorne to Manchester (about 22 miles away).
Here we cover the CW10 postcode area. We regularly work on streets such as Middlewich Road and Birch Lane. Neighbouring places we cover include Clive (1 mile south-west), Middlewich (1 mile south-east), Clive Green (1 mile south-west), Sutton (2 miles south-east) and Wimboldsley (2 miles south). Further out, we also cover Crewe (7 miles south), Macclesfield (15 miles east), Congleton (11 miles east), Wilmslow (13 miles north-east), Nantwich (9 miles south) and Knutsford (8 miles north-east).
Local landmarks in Stanthorne
Typical jobs here are in homes near Golden Lion pub, St Michael and All Angels and Middlewich High School and the streets around them. The closest station to Stanthorne is Winsford station, roughly 1.2 miles west of the centre. Further afield, we also cover the area around Victoria Infirmary (4.9 miles north-west).
Landlord and trade work in Stanthorne
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Also near Stanthorne
What else we do in Stanthorne
About our accreditations · Every repair comes with a one-year guarantee.
