Suffolk · England
Bath re-enamelling & resurfacing in Stanton Street, Suffolk
Fixed-price bath re-enamelling in Stanton Street and the surrounding area, normally in one visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
About our bath re-enamelling in Stanton Street
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a dull, rough surface that won’t come clean and chips and rust in more than one place.
Every job is backed for twelve months in Stanton Street and everywhere else. If something goes wrong with the work, we come back.
- Location
- Stanton Street (IP31)
- Area hub
- Suffolk
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
- Let us know which floor the room is on
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Read more
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
- A bath split right through the body
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Common problems we fix in Stanton Street
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Clients normally contact us about:
- Wear marks under the taps
- An old resurfacing that’s failing
- A roll-top that’s seen better days
- An outdated colour you’d like to change
Comparing quotes
- Aftercare advice
- Who will actually do the work
- How your room will be protected
- What happens if they find more damage
Stanton Street and the surrounding area
Stanton Street is about 7 miles east of Bury St Edmunds, in Suffolk. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Stanton Street is one of 731 places in Suffolk we cover. Our jobs stretch from Stanton Street to London (67 miles away).
All of IP31 is within our area. We regularly work on streets such as Ixworth Road, Hall's Lane and Packway Gardens. If you are just outside Stanton Street, we cover Norton (1 mile south-east), Stowlangtoft (1 mile north), Norton Little Green (1 mile east), Hunston (2 miles north-east) and Grimstone End (2 miles north-west). Within a short drive, we also cover Bury St Edmunds (7 miles west), Stowmarket (8 miles south-east), Diss (13 miles north-east), Needham Market (11 miles south-east), Chilton (7 miles south-east) and Elmswell (3 miles south-east).
What’s near Stanton Street
Locally, our jobs take us to homes close to Church of St Andrew, Norton CEVC Primary School and Thurston Community College and the streets around them. For rail, the closest station is Thurston station, roughly 2.6 miles west. Further afield, we also cover the area around Pakenham Water Mill (2.1 miles north-west). Not far away are Black Bourn Valley.
Stanton Street: your questions answered
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath re-enamelling cost in Stanton Street?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Stanton Street. What changes the price is:
- Unusual colours or finishes
- The type of damage
- The material
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
Two or three clear photos are normally enough. It helps if you send:
- Any earlier repairs or coatings
- Natural light rather than flash
- The material, if you know it
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Fix dripping taps quickly
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Also near Stanton Street
Also in Stanton Street
Landlord and trade work in Stanton Street
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
- One price list for the whole UK
- Every repair guaranteed for a year
Take a look at our pricing or bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
