Leicestershire · England

Bath Re-enamelling for Stanton under Bardon homes

Full bath re-enamelling and resurfacing at your home in Stanton under Bardon, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Brown or grey marks that don’t clean off
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Stanton under Bardon

Do you need bath re-enamelling in Stanton under Bardon?

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Keep an eye out for these signs:

  • A peeling or bubbling previous coating
  • Enamel that is lost its shine and feels rough
  • Stains that won’t shift
  • Wear marks under the taps

What to look for in a quote

  • What prep work is covered
  • How long it needs to cure
  • If travel is included in the price
  • A fixed quote, and whether VAT is included

Our hiring checklist

Bath re-enamelling in Stanton under Bardon without replacing anything

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and a coloured bath you want in white.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Stanton under Bardon (LE67)
Area hub
Leicestershire
Cover
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Repair or replace: which is better?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • We come to you, anywhere in the UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Colour mixed on the day to match

See our pricing and guide to resurfacing and replacement costs.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Holes rusted through the metal
  • A cast iron or steel bath that’s cracked right through
  • An acrylic bath that flexes badly underfoot

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

Landlords, agents and businesses in Stanton under Bardon

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

How we price bath re-enamelling

Resurfacing from £350. We don’t charge extra for travel to Stanton under Bardon. The price comes down to:

  • The material and finish
  • Access to the area
  • What kind of damage it is
  • The size and number of damaged areas

A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare
  • A picture taken from further back

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

What happens on the day

You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s normally ready the following day.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Have somewhere for us to park nearby if possible
  • Have a window or extractor fan available

Getting a price

If you are in Stanton under Bardon and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

Looking after it afterwards

To keep it looking its best:

  • Wash away dyes and oils after use
  • Never use suction bath mats
  • Respect the curing time we give you
  • Use washing-up liquid and a soft cloth

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

About Stanton under Bardon

Stanton under Bardon is about 3 miles south-east of Coalville, in Leicestershire. Our repair technicians come to homes and businesses in Stanton under Bardon and the surrounding area, so you don’t need to take anything anywhere. Stanton under Bardon is one of 287 places in Leicestershire where we work. You can also see our page for Birmingham, about 29 miles away.

Our visits in LE67 work the same way as everywhere else we cover. From Main Street, Everard Crescent and Everard Way or anywhere nearby, we can come to you. Neighbouring places we cover include Thornton (2 miles south), Bagworth (2 miles south-west), Battram (2 miles west), Ellistown (2 miles west) and Merry Lees (3 miles south). We also work in nearby towns such as Loughborough (7 miles north-east), Hinckley (11 miles south), Wigston (11 miles south-east), Coalville (3 miles north-west), Ashby-de-la-Zouch (8 miles north-west) and Shepshed (6 miles north).

Landmarks near Stanton under Bardon

We visit homes around St Mary, Billa Barra Hill and South Charnwood High School. Nearby you will also find Snibston Discovery Museum (4 miles north-west). Open spaces near Stanton under Bardon include Bardon Hill and Charnwood Lodge.

Map of Stanton under Bardon © OpenStreetMap contributors

Your questions about bath re-enamelling in Stanton under Bardon

How long does re-enamelling take?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Do you cover Stanton under Bardon?

Yes. We cover the whole UK and travel to Stanton under Bardon and the rest of Leicestershire. Send pictures and we’ll quote, or call 0345 017 0787.

How do I get a price for bath re-enamelling in Stanton under Bardon?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Can you quote from photos?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.