Oxfordshire · England
Bath Re-enamelling for Steeple Barton homes
Bath re-enamelling for Steeple Barton, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Steeple Barton
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Typical jobs include a coloured bath you want in white and an original cast iron bath that needs restoring, on pressed steel baths, basins & shower trays and cast iron baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Steeple Barton (OX25)
- County
- Oxfordshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Do you need bath re-enamelling in Steeple Barton?
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Common reasons people in Steeple Barton contact us are:
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- Several chips and rust patches
- A roll-top that is seen better days
What your quote should include
- When it can be used again
- Aftercare advice
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- How hard the colour is to match
- How many items we do on one visit
- Access to the area
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
You can normally get a fixed price without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- One picture of the whole bath
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Keep pets and children out of the room while we work
How to get a price
Most clients in Steeple Barton get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Steeple Barton: your questions answered
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What areas do you cover?
We cover the whole UK, including Steeple Barton and the rest of Oxfordshire. Just include your postcode and we will confirm dates.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Looking after it afterwards
To keep it looking its best for years:
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What a repair cannot fix
To be straight with you, there are a few things a repair won’t fix:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Landlord and trade work in Steeple Barton
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Places near Steeple Barton
More services for Steeple Barton
Our work in Steeple Barton
Steeple Barton is about 8 miles west of Bicester, in Oxfordshire. We travel to clients in Steeple Barton and the surrounding area, so there’s no workshop to go to. We cover all 443 towns and villages in Oxfordshire. You can also see our page for Birmingham, about 44 miles away.
Postcode districts we cover here: OX25. We also travel to Middle Barton (1 mile north-west), Westcott Barton (1 mile west), Steeple Aston (2 miles east), Middle Aston (2 miles north-east) and Duns Tew (2 miles north). Larger places within reach include Oxford (13 miles south), Banbury (10 miles north), Bicester (8 miles east), Witney (11 miles south-west), Carterton (15 miles south-west) and Kidlington (8 miles south).
Landmarks near Steeple Barton
Locally, our jobs take us to homes close to Holt Hotel (Oxfordshire), Church of St Mary and Middle Barton Primary School and the streets around them. For rail, the closest station is Heyford station, about 2 miles east. Nearby you will also find Deddington Castle (4.2 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
