Cheshire East · England
Bath Re-enamelling in Stoke Bank
Bath re-enamelling in Stoke Bank without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
How we handle bath re-enamelling in Stoke Bank
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s stains that won’t shift and chips and rust in more than one place, we can generally put it right, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Stoke Bank (CW5)
- Region
- Cheshire East
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Stoke Bank
What else we do in Stoke Bank
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What affects the price in Stoke Bank
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- How much damage there is
- Where the damage is and how we get to it
- How many items we do on one visit
- What the surface is made of
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- Natural light rather than flash
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Any details about the material
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Our work in Stoke Bank
Stoke Bank is about 3 miles north-west of Nantwich, in Cheshire East. Our technicians come to homes and businesses in Stoke Bank and nearby villages, so you do not need to take anything anywhere. We cover all 254 towns and villages across Cheshire East, from the larger towns to small villages. Our jobs stretch from Stoke Bank to Liverpool (about 25 miles away).
Every address in CW5 is within our area, from the main roads to the quietest streets. From Old Chester Road and Chester Road or anywhere nearby, we can come to you. Close by, we cover Barbridge (1 mile north-west), Wardle (1 mile north-west), Aston juxta Mondrum (2 miles east), Cholmondeston (2 miles north) and Worleston (2 miles east). We also work in nearby towns such as Crewe (5 miles east), Nantwich (3 miles south-east), Middlewich (8 miles north-east), Sandbach (9 miles east), Coppenhall (5 miles east) and Holmes Chapel (11 miles north-east).
Near you in Stoke Bank
Typical jobs here are in homes near The Olde Barbridge Inn and the streets around them. Stoke Bank’s nearest station is Nantwich station, about 3.6 miles south-east. Further afield, we also cover the area around Nantwich Castle (3.3 miles south-east) and Nantwich Workhouse (3 miles south-east).
Looking after it afterwards
How the surface is treated afterwards matters:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Landlord and trade work in Stoke Bank
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath re-enamelling in Stoke Bank?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
These are the problems we are asked about most:
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Before you book anyone
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- How the colour is matched
- If travel is included in the price
Stoke Bank: your questions answered
Are there extra charges for Stoke Bank?
Travel is included in the price, and we charge the same wherever you are.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
