Essex · England
Bath Re-enamelling in Stoke-by-Nayland
We travel to Stoke-by-Nayland for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Bath re-enamelling in Stoke-by-Nayland, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. Typical jobs include a dull, rough surface that won’t come clean and a roll-top that’s seen better days, across pressed steel baths, basins & shower trays and Victorian roll-tops.
Every repair comes with a one-year guarantee.
- Where
- Stoke-by-Nayland (CO6)
- Area hub
- Essex
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- How many items we do on one visit
- Where the damage is and how we get to it
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- Natural light rather than flash
- One picture of the entire bath
- What it’s made of, if you know
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
What we’re called out for in Stoke-by-Nayland
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The things clients generally mention when they call include:
- A coloured bath you want in white
- A roll-top that’s seen better days
- Staining under the taps and around the waste
- Thin, worn enamel in places
What to look for in a quote
- Whether the price covers travel
- How soon you can use it again
- How long the guarantee is and what it covers
- How the colour is matched
Our work in Stoke-by-Nayland
Stoke-by-Nayland is about 7 miles north of Colchester, in Essex. Clients in Stoke-by-Nayland get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in all 644 towns and villages in Essex. We work right across the region, from Stoke-by-Nayland to London (about 54 miles away).
Here we cover the CO6 postcode area. You’ll find streets such as Goldenlond, The Blundens and Crossfields. We also cover the places around Stoke-by-Nayland: Cock Street (1 mile west), Nayland (1 mile south-west), Leavenheath (2 miles west), Wissington (2 miles south-west) and Little Horkesley (3 miles south-west). Larger places within reach include Colchester (7 miles south), Camulodunum (7 miles south), Halstead (11 miles west), Greenstead (7 miles south), Tiptree (14 miles south-west) and Wivenhoe (9 miles south).
What’s near Stoke-by-Nayland
Locally, our jobs take us to homes close to St Mary's Church, Stoke-by-Nayland Church of England Primary School and The Crown Inn. A little further out are Severalls Hospital (5 miles south) and Lindsey Castle (4.8 miles north). Green spaces nearby include Arger Fen.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for the best part of a day. Before we go, we’ll explain when it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
Preparing for the visit
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
How to look after the repair
To keep it looking its best:
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Have chips seen to early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Questions from Stoke-by-Nayland
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Places near Stoke-by-Nayland
More services for Stoke-by-Nayland
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Stoke-by-Nayland
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
