Hampshire · England
Bath re-enamelling & resurfacing in Stoke, Hampshire
Damaged bath in Stoke? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Several chips and rust patches
About our bath re-enamelling in Stoke
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We are often asked to fix wear marks under the taps and an original cast iron bath that needs restoring, in basins & shower trays, acrylic baths and Victorian roll-tops.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Where
- Stoke (PO11)
- Area hub
- Hampshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Stoke
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers typically contact us about:
- Thin, worn enamel in places
- A coloured bath you want in white
- Lots of chips and rust spots
- An old resurfacing that is failing
What your quote should include
- When it can be used again
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- How to look after the finish
Places near Stoke
More services for Stoke
What a repair can’t fix
We would rather lose a job than do one that won’t last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Stoke
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Looking after it afterwards
How the surface is treated afterwards matters:
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- No extra charge for your area
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
- Fixed prices from your photos
See our pricing or resurfacing vs replacement cost guide.
Where we work around Stoke
Stoke is about 3 miles south of Havant, in Hampshire. We travel to homes and businesses in Stoke and nearby villages, so nothing has to leave your home. Stoke is one of 683 places in Hampshire where we work. Our jobs stretch from Stoke to London (61 miles away).
We cover every part of the PO11 postcode area and the streets around it. Jobs here include addresses on Havant Road, Rogers Mead and Northwood Lane. With the A3023 close by, Stoke is easy for our technicians to reach. We also cover the places around Stoke: North Hayling (1 mile east), Tye (1 mile east), Northney (1 mile north-east), Langstone (1 mile north) and Warblington (1 mile north). We also work in nearby towns such as Gosport (8 miles west), Havant (3 miles north), Fareham (10 miles west), Horndean (6 miles north), Waterlooville (5 miles north-west) and Petersfield (13 miles north).
Landmarks near Stoke
Locally, our jobs take us to homes close to The Maypole pub, Church of St Peter and The Hayling College. The nearest railway station is Warblington station, roughly 2.4 miles north of the centre. A little further out are Warblington Castle (1.8 miles north) and Havant Museum (2.1 miles north). Not far away are Hayling Billy.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say right away whether it can be repaired.
Advice
Stoke: your questions answered
How much does bath re-enamelling cost in Stoke?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your PO11 postcode.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you work in Stoke?
Yes, we do. We send a technician to Stoke for every job, and the price is the same as everywhere else.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
About our accreditations · Every repair comes with a one-year guarantee.
