Derbyshire · England
Bath Re-enamelling for Stonebroom homes
We travel to Stonebroom for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Ensure the room can be ventilated
How to get a price
Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Stonebroom, and we’ll come back with a fixed quote.
Read more
How we handle bath re-enamelling in Stonebroom
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s lots of chips and rust spots and brown or grey marks that don’t clean off, we can help.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Where
- Stonebroom (DE55)
- Region
- Derbyshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Stonebroom. The price reflects:
- Whether old repairs or coatings need taking off
- Access to the area
- The size and number of damaged areas
- Doing more than one item at once
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A wider photo showing the whole bath
- The material, if you know it
- Details of any past repairs
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Our work in Stonebroom
Stonebroom is about 5 miles west of Sutton in Ashfield, in Derbyshire. We visit customers in Stonebroom and the surrounding area, so nothing has to leave your home. Stonebroom is one of 532 places in Derbyshire where we work. You can also see our page for Manchester, about 42 miles away.
Every address in DE55 is within our area. Jobs here include addresses on High Street, Wesley Road and Thackeray Road. If you are just outside Stonebroom, we cover Morton (1 mile north), Westhouses (1 mile south-east), Blackwell (2 miles south-east), Newton (2 miles east) and Pilsley (2 miles north-east). Within a short drive, we also cover Chesterfield (8 miles north), Ilkeston (11 miles south), Belper (8 miles south-west), Heanor (8 miles south), Dronfield (12 miles north) and Ripley (6 miles south).
Landmarks near Stonebroom
Typical jobs here are in homes near Stonebroom Primary and Nursery School, Tibshelf Community School and Live and Let Live pub, among other places. Stonebroom’s nearest station is Alfreton station, roughly 2.1 miles south-east. A little further out are Designer Outlet East Midlands (3.6 miles south-east) and Clay Cross Urban District (2.5 miles north).
Common questions in Stonebroom
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
How do I get a price for bath re-enamelling in Stonebroom?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Landlord and trade work in Stonebroom
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, pictures and access details.
What we’re called out for in Stonebroom
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Clients usually contact us about:
- Stains that won’t shift
- Wear marks under the taps
- An old resurfacing that’s failing
- A coloured bath you want in white
Before booking anyone
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- Who will actually do the work
Places near Stonebroom
Also in Stonebroom
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Stonebroom
- Every repair guaranteed for a year
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Rooms protected and left tidy
Take a look at our pricing or bath cost comparison.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
