Stirling · Scotland
Bath re-enamelling & resurfacing in Strathblane, Stirling
Full bath re-enamelling and resurfacing for homes and businesses in Strathblane and across Stirling. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps
What affects the price in Strathblane
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- How hard the colour is to match
- Doing more than one item at once
- The material
- Where the damage is and how we get to it
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Something in shot to show the size
Send us pictures of the damage and one of the entire item, and tell us you’re in Strathblane, and we’ll come back with a fixed quote.
Bath re-enamelling in Strathblane, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, basins & shower trays and cast iron baths, and common reasons people get in touch are several chips and rust patches and a bath that stays dull however much you clean it.
We stand behind the work with a one-year guarantee.
- Where
- Strathblane (G63)
- Area hub
- Stirling
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Strathblane
Strathblane is about 5 miles north of Bearsden, in Stirling. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Strathblane is one of 55 places in Stirling we cover. Our nearest city page is Glasgow, about 9 miles away.
Our repair technicians cover all of the G63 postcode area and the streets around it. From Station Road, Southview Road and Kirkhouse Road or a nearby road, we can come to you. If you are just outside Strathblane, we cover Milngavie (3 miles south), Auchenhowie (4 miles south), Bearsden (5 miles south), Faifley (5 miles south-west) and Westerton (6 miles south). Within a short drive, we also cover Killearn (5 miles north-west), Balfron (6 miles north), Kippen (11 miles north-east) and Drymen (8 miles north-west).
Local landmarks in Strathblane
Around Strathblane, we work in homes near Mugdock Country Park and Parish Church and Churchyard and the streets around them. Strathblane’s nearest station is Milngavie station, about 3.2 miles south of the centre. A little further out are Killearn Hospital (4.7 miles north-west) and Mugdock Castle (1.6 miles south-west). For a walk, there is Dumgoyne and Dumbrock Loch.
For landlords and businesses
For anyone letting property in or around Strathblane, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Also in Strathblane
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What we are called out for in Strathblane
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- A coloured bath you want in white
- Several chips and rust patches
- A peeling or bubbling previous coating
Before you book anyone
- How soon you can use it again
- How to look after the finish
- What happens if they find more damage
- Who will actually do the work
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What we do, step by step
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow a full day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Open a window if you can
Ask for a price
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
How to look after the repair
To keep it looking its best:
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Your questions about bath re-enamelling in Strathblane
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Honest limits
In fairness, there are a few things a repair will not fix:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
