Stirling · Scotland
Bath Re-enamelling for Killearn homes
Bath re-enamelling across Killearn and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Killearn customers choose us
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- Fixed prices from your photos
- Colour mixed on the day to match
Take a look at our pricing or guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Killearn
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with wear marks under the taps and several chips and rust patches, we can help.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Killearn (G63)
- County
- Stirling
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Killearn
What else we do in Killearn
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Signs you need bath re-enamelling in Killearn
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
These are the problems we’re asked about most:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Several chips and rust patches
- A roll-top that is seen better days
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How your room will be protected
- Whether the price covers travel
- Whether they match the colour on site
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a full day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you are in Killearn, and we will reply with a fixed price.
Advice
FAQs for Killearn
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do you cover the entire of Stirling?
All of Stirling, and the rest of the UK. There is no extra charge for travel.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Killearn and the surrounding area
Killearn is about 9 miles north of Bearsden, in Stirling. We visit homes and businesses in Killearn, so there’s no workshop to go to. Killearn is one of 55 places in Stirling we cover. You can also see our page for Glasgow, about 13 miles away.
Here we cover the G63 postcode area. We regularly work on streets such as The Square, Main Street and Station Road and the roads around them. Other places close to Killearn include Boquhan (1 mile north-east), Balfron (2 miles north-east), Croftamie (3 miles west), Drymen (4 miles north-west) and Strathblane (5 miles south-east).
Around Killearn
Our clients here include homes close to Old Parish Church and Graveyard, among other places. A little further out are Killearn Hospital (1 mile south-west) and Ballikinrain (2.7 miles north-east). For a walk, there is Craigallian Loch and Dumgoyne.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Killearn. The price depends on:
- The size and number of damaged areas
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Access to the area
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- The material, if you know it
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Landlords, agents and businesses in Killearn
We work for landlords, letting agents and housing providers in Killearn as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
