Monmouthshire · Wales
Bath re-enamelling & resurfacing in Stroat, Monmouthshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Stroat. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Thin, worn enamel in places
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
How we handle bath re-enamelling in Stroat
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Whether it’s wear marks under the taps and a coating lifting around the plughole, we can help.
A one-year guarantee comes as standard.
- Area
- Stroat (NP16)
- Region
- Monmouthshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Stroat
More services for Stroat
Landlord and trade work in Stroat
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Store bottles off the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Common problems we fix in Stroat
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
People normally call us when they notice one of these:
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Comparing quotes
- How to care for the finish
- What preparation is included
- What the guarantee covers, and for how long
- Who will actually do the work
Where we work around Stroat
Stroat is about 3 miles north-east of Chepstow, in Monmouthshire. Whether you’re in the middle of Stroat or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Stroat is one of 115 towns and villages in Monmouthshire we cover. We work right across the region, from Stroat to Birmingham (63 miles away).
Our visits in NP16 are booked in the same way as anywhere else. We also travel to Boughspring (1 mile south-west), Tidenham Chase (1 mile north-west), Netherhope (1 mile south-west), High Woolaston (1 mile north-east) and Woodcroft (2 miles south-west). Within a short drive, we also cover Chepstow (3 miles south-west), Monmouth (10 miles north-west), Cil-y-coed (8 miles south-west), Bulwark (4 miles south-west), Overmonnow (10 miles north-west) and Gwndy (10 miles south-west).
What’s near Stroat
Our customers here include homes close to Saint Michael & All Angels and East Wood and the streets around them. Stroat’s nearest station is Chepstow station, roughly 3.1 miles south-west of the centre. Further afield, we also cover the area around Chepstow Community Hospital (3.5 miles south-west) and High Woolaston (1.1 miles north-east). Not far away are Linen Well and Ridley Bottom.
What affects the price in Stroat
Resurfacing from £350. Every quote is fixed and free. What we look at:
- What kind of damage it is
- How many items we do on one visit
- How easy the damage is to reach
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
You can typically get a fixed price without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- The material, if you know it
- Natural light rather than flash
- A picture taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Stroat questions
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you cover Stroat?
Yes. We work across the UK and travel to Stroat. Send us photos for a fixed quote, or call 0345 017 0787.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What happens after I send photos?
You will get a fixed quote back, plus dates. You’re under no obligation.
The process
The work is clean and fairly quiet. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Keep a parking space free if you can
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Advice
When a repair isn’t the answer
In fairness, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
