Hampshire · England
Bath re-enamelling & resurfacing in Stroud, Hampshire
We travel to Stroud for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- Lots of chips and rust spots
Bath re-enamelling at your home in Stroud
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are worn patches where water runs and sits and a coloured bath you want in white.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Stroud (GU32)
- County
- Hampshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How to care for the repair
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Questions from Stroud
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work in Stroud?
We do. We send a technician to Stroud for every job, and the price is the same as everywhere else.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Stroud and the surrounding area
Stroud is about 2 miles west of Petersfield, in Hampshire. From the centre of Stroud to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 683 towns and villages in Hampshire. We work right across the region, from Stroud to London (about 51 miles away).
Our visits in GU32 are booked in the same way as anywhere else. We regularly work on streets such as Winchester Road, Stroudfields and Ramsdean Road and the roads around them. If you’re just outside Stroud, we cover Langrish (1 mile west), Petersfield (2 miles east), Froxfield Green (2 miles north-west), Steep (2 miles north-east) and High Cross (2 miles north). Within a short drive, we also cover Winchester (15 miles west), Havant (10 miles south), Fareham (15 miles south-west), Horndean (7 miles south), Alton (10 miles north) and Waterlooville (9 miles south).
What’s near Stroud
Around Stroud, we work in homes near Stroud Mission Church, Langrish Primary School and Seven Stars pub. Also close by are The Petersfield School (1.4 miles east) and Morton House School (1.4 miles east). The nearest railway station is Petersfield station, about 1.3 miles east of the centre. Nearby you’ll also find Petersfield Community Hospital (1.3 miles east) and Clanfield Earthwork (4.2 miles south). The countryside around Stroud includes Liss Riverside Railway Walk South and Pidham Hill.
Also near Stroud
More services for Stroud
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why book with us
- CHAS and Constructionline accredited
- Usually one visit, start to finish
- No need to remove anything
- Same prices wherever you are
Take a look at our full price list and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Any earlier repairs that need removing first
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Work for landlords and builders
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What happens on the day
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes most of the day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Open a window if you can
- Clear the area around the damage
- Let us know if it has been repaired before
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
