Hampshire · England
Bath re-enamelling & resurfacing in Swanwick, Hampshire
Bath re-enamelling for Swanwick, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A coloured bath you want in white
- Chips and rust in more than one place
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Swanwick. The price comes down to:
- How much damage there is
- Access to the area
- Doing more than one item at once
- What kind of damage it is
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your pictures
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Any details about the material
- Where you are, by postcode
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Bath re-enamelling at your home in Swanwick
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. We work on pressed steel baths, acrylic baths and basins & shower trays, and the jobs we see most are a roll-top that’s seen better days and an outdated colour you’d like to change.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Swanwick (SO31, PO15)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Swanwick
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Swanwick
- Usually one visit, start to finish
- Every repair guaranteed for a year
- No extra charge for your area
- A fixed quote before you book
See our prices page or resurfacing vs replacement cost guide.
Covering Swanwick
Swanwick is about 2 miles south of Hedge End, in Hampshire. Our repair technicians come to clients in Swanwick, so nothing has to leave your home. Swanwick is one of 683 places in Hampshire where we work. Our nearest city page is London, about 67 miles away.
Our repair technicians cover all of SO31 and PO15. That includes homes on Walpole Lane, Ashby Mews and Swanwick Lane. Other places close to Swanwick include Lower Swanwick (1 mile north-west), Sarisbury (1 mile south-east), Park Gate (1 mile south-east), Burridge (1 mile north-east) and Sarisbury Green (1 mile south). Larger places within reach include Winchester (12 miles north), Gosport (8 miles south-east), Havant (13 miles east), Eastleigh (6 miles north-west), Fareham (4 miles south-east) and Horndean (12 miles east).
Landmarks near Swanwick
Locally, our jobs take us to homes close to Brookfield Community School and Language College, The Old Ship Inn and Church of St Paul, among other places. Swanwick’s nearest station is Bursledon station, roughly 0.8 miles west of the centre. Well-known places in the area include Bursledon Brickworks Industrial Museum (less than half a mile north) and St Andrew's Castle (2.4 miles south-west). For a walk, there’s Swanwick Lakes.
Looking after it afterwards
Nothing complicated is needed:
- Have chips seen to early
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Don’t leave bottles, razors or sponges standing on the surface
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
Ask for a price
Most clients in Swanwick get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
When to call us in Swanwick
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Look out for these signs:
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
- Several chips and rust patches
Comparing quotes
- What the guarantee covers, and for how long
- Aftercare advice
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
Towns and villages near Swanwick
Also in Swanwick
Common questions in Swanwick
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you work in Swanwick?
Yes. We work across the UK and come to Swanwick. Send photos and we will quote, or call 0345 017 0787.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
When a repair isn’t the answer
It helps to know what we cannot do:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
