Conwy · Wales
Bath Re-enamelling for Tan-y-lan homes
Local bath re-enamelling for Tan-y-lan: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Worn patches where water runs and sits
Bath re-enamelling at your home in Tan-y-lan
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include stains that won’t shift and an old resurfacing that’s failing, across pressed steel baths, Victorian roll-tops and acrylic baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Tan-y-lan (LL29)
- County
- Conwy
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Tan-y-lan
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. There is no obligation to book.
How much does bath re-enamelling cost in Tan-y-lan?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your LL29 postcode.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Also near Tan-y-lan
What else we do in Tan-y-lan
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
When to call us in Tan-y-lan
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted:
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
- Staining under the taps and around the waste
- Wear marks under the taps
Comparing quotes
- What aftercare is recommended
- Whether the colour is mixed to match
- When it can be used again
- Who turns up on the day
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Tan-y-lan. What changes the price is:
- How many items we do on one visit
- How hard the colour is to match
- Any earlier repairs that need removing first
- What the surface is made of
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what helps:
- The postcode, so we can plan the visit
- A picture taken from further back
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Our work in Tan-y-lan
Tan-y-lan is about 2 miles east of Bae Colwyn, in Conwy. Customers in Tan-y-lan get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Tan-y-lan is one of 75 places in Conwy we cover. We work right across the region, from Tan-y-lan to Liverpool (about 32 miles away).
Every address in LL29 is covered, from the main roads to the quietest streets. Local streets include West Road, Cliff Road and Beach Road. If you are just outside Tan-y-lan, we cover Llysfaen (1 mile south-east), Mynydd Marian (1 mile east), Llanddulas (2 miles east), Terfyn (2 miles east) and Rhyd-y-foel (2 miles south-east). We also work in nearby towns such as Llandudno (6 miles west), Abergele (4 miles east), Conwy (6 miles west), Cwlach (7 miles west), Deganwy (6 miles west) and Llandudno Junction (5 miles west).
Local landmarks in Tan-y-lan
We visit homes around Ysgol Bryn Elian, Ysgol Swn Y Don and Ship Hotel, among other places. The nearest railway station is Colwyn Bay station, about 1.7 miles west of the centre. A little further out are Colwyn Bay Community Hospital (1 mile west) and Ednyfeds Castle (2.9 miles west). Green spaces nearby include Mynydd Marian and Rhos on Sea Golf Course Lake.
Repair or replace in Tan-y-lan?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- One price list for the whole UK
- Generally one visit, start to finish
Read our prices page or bath cost comparison.
What a repair cannot fix
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A bath that’s rusted through
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Tan-y-lan
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
How to get a price
If you’re in Tan-y-lan and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
