Angus · Scotland
Bath Re-enamelling for Tannadice homes
Full bath re-enamelling and resurfacing at your home in Tannadice, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Tannadice
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We regularly repair acrylic baths, basins & shower trays and pressed steel baths, and the jobs we see most are stains that won’t shift and an old resurfacing that’s failing.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Tannadice (DD8)
- Area hub
- Angus
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Open a window if you can
How to get a price
Upload photos of the damage and a wider shot of the whole item, with your DD8 postcode, and we will reply with a fixed quote.
Read more
What affects the price in Tannadice
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How many areas need work
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Access to the area
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A picture taken from further back
- Details of any past repairs
- Where you are, by postcode
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Repair or replace in Tannadice?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why Tannadice customers choose us
- A fixed quote before booking
- Everything repaired in place
- Technicians who travel to you, UK-wide
- Same prices wherever you are
Read our prices page or resurfacing vs replacement cost guide.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Don’t leave a chip unrepaired
- Store bottles off the bath
- Dry the bath after use to stop limescale
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
More services for Tannadice
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Where we work around Tannadice
Tannadice is about 5 miles north of Forfar, in Angus. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Tannadice is one of 40 towns and villages in Angus where we work. Our nearest city page is Edinburgh, about 55 miles away.
We work across the DD8 postcode area. Local streets include South Esk Road, Broomhill Road and Anne Thomson's Way, and we cover them all. We also travel to Noranside (1 mile north), Aberlemno (3 miles south-east), Lunanhead (4 miles south), Forfar (5 miles south) and Padanaram (5 miles south-west). Within a short drive, we also cover Arbroath (15 miles south-east), Kirriemuir (6 miles south-west), Brechin (8 miles east), Hunter's Town (15 miles south), Letham (7 miles south-east) and Edzell (10 miles north-east).
Local landmarks in Tannadice
Our clients here include homes close to Parish Church And Old Parish Church and the streets around them. Nearby you’ll also find Whitehills Hospital (4.3 miles south) and Vayne Castle (1.6 miles north-east). Open spaces near Tannadice include Loch Fithie.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
Send us photos and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Common problems we fix in Tannadice
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Keep an eye out for any of the following:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Thin, worn enamel in places
What to look for in a quote
- Whether they match the colour on site
- How long it needs to cure
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
Questions from Tannadice
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we will ask.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling take?
One day for most baths, ready the next day. We will confirm timings when we quote.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Which areas do you work in?
We cover the entire UK, including Tannadice and the rest of Angus. Send your postcode with your pictures and we will offer you dates.
About our accreditations · Every repair comes with a one-year guarantee.
