Angus · Scotland
Bath re-enamelling & resurfacing in Letham, Angus
Full bath re-enamelling and resurfacing in Letham, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- An outdated colour you’d like to change
Bath re-enamelling in Letham without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. We work on acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are enamel that’s lost its shine and feels rough and an original cast iron bath that needs restoring.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Letham (DD8)
- County
- Angus
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Where the damage is and how we get to it
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- One picture of the whole bath
- Any earlier repairs or coatings
Send us a picture of the damage and one of the entire item, with your DD8 postcode, and we’ll reply with a fixed price.
Repairing versus replacing in Letham
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why book with us
- Everything repaired in place
- Free fixed quotes from pictures
- Rooms protected and left tidy
- Usually one visit, start to finish
Read our prices page and guide to resurfacing and replacement costs.
For landlords and businesses
Landlords, letting agents and housing providers in Letham use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Make sure the area is dry
- Let us know if it has been repaired before
- Make sure the room can be ventilated
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Read more
Covering Letham
Letham is about 5 miles east of Forfar, in Angus. Jobs in Letham are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in all 40 towns and villages in Angus. Our jobs stretch from Letham to Edinburgh (about 50 miles away).
Our technicians cover all of DD8 and the streets around it. Whether you live on The Square, Kirkgait and Gardyne Street or a nearby road, a technician can come to you. Neighbouring places we cover include Craichie (2 miles south-west), Tulloes (2 miles south-west), Hillend (2 miles west), Lownie Moor (3 miles west) and Kingsmuir (3 miles west). Within a short drive, we also cover Arbroath (8 miles south-east), Forfar (5 miles west), Carnoustie (9 miles south), Kirriemuir (9 miles west), Brechin (8 miles north-east) and Hunter's Town (9 miles south). Being one of Angus’s larger places, Letham is somewhere we visit often.
Near you in Letham
In Letham, that means homes near Old Church, among other places. Nearby you’ll also find Whitehills Hospital (4.1 miles west) and Balgavies Castle (1.9 miles north). Open spaces near Letham include Balgavies Loch.
Common questions in Letham
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do you cover the entire of Angus?
All of Angus, and the rest of the UK. There’s no extra charge for travel.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What we can’t put right
Before you book, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What we’re called out for in Letham
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Most people contact us when they notice something like this:
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
- Stains that will not shift
- Worn patches where water runs and sits
Before booking anyone
- What happens if the damage is worse than the pictures show
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- Whether they match the colour on site
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What else we do in Letham
About our accreditations · Every repair comes with a one-year guarantee.
