Hampshire · England
Bath re-enamelling & resurfacing in Tapnage, Hampshire
Local bath re-enamelling for Tapnage: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- An old resurfacing that’s failing
Bath re-enamelling in Tapnage, done in place
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Our technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are several chips and rust patches and a peeling or bubbling previous coating.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Area
- Tapnage (PO17)
- Region
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There’s no area surcharge for Tapnage. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Any earlier repairs that need removing first
- Doing more than one item at once
Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- A wider photo showing the whole bath
- The material, if you know it
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Landlord and trade work in Tapnage
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Common questions in Tapnage
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will there be a smell?
There may be a mild smell during the work.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How much does bath re-enamelling cost in Tapnage?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you come to Tapnage?
Yes. We cover the whole UK and travel to Tapnage. Send pictures and we will quote, or call 0345 017 0787.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Don’t leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repairing versus replacing in Tapnage
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Most jobs done in one visit
- One price list for the entire UK
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or guide to resurfacing and replacement costs.
Our work in Tapnage
Tapnage is about 3 miles north of Fareham, in Hampshire. Customers in Tapnage get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover 683 places in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 64 miles away.
Postcode districts we cover here: PO17. We also cover the places around Tapnage: Knowle (1 mile south-east), Funtley (1 mile south), Whiteley (2 miles west), Burridge (2 miles west) and Segensworth (2 miles south-west). We also work in nearby towns such as Winchester (12 miles north), Gosport (7 miles south-east), Havant (10 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south) and Horndean (9 miles east).
Around Tapnage
We visit homes around The Henry Cort Community College and the streets around them. Tapnage’s nearest station is Swanwick station, roughly 2.4 miles south-west of the centre. A little further out are Knowle Hospital (0.9 miles south-east) and Fareham Shopping Centre (3.1 miles south-east). For a walk, there’s Swanwick Lakes.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Tapnage
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Also near Tapnage
Also in Tapnage
Common problems we fix in Tapnage
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Common reasons people in Tapnage contact us include:
- An old resurfacing that’s failing
- Several chips and rust patches
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
What your quote should include
- What happens if the damage is worse than the photos show
- How long it needs to cure
- How the room is protected while they work
- How the colour is matched
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let us know which floor the room is on
- Clear the area around the damage
- Point us to the nearest place to park
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
