Dorset · England
Bath Re-enamelling in Tarrant Gunville
Bath re-enamelling in and around Tarrant Gunville: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Stains that will not shift
Where we work around Tarrant Gunville
Tarrant Gunville is about 4 miles north-east of Blandford Forum, in Dorset. We travel to homes and businesses in Tarrant Gunville and nearby villages, so there’s no workshop to go to. Our technicians cover all 462 towns and villages across Dorset.
All of DT11 is covered, from the main roads to the quietest streets. We also cover the places around Tarrant Gunville: Ashmore (3 miles north), Iwerne Minster (4 miles west), Sutton Waldron (4 miles north-west), Fontmell Magna (4 miles north-west) and Compton Abbas (5 miles north-west). We also work in nearby towns such as Wimborne Minster (10 miles south-east), Blandford Forum (4 miles south-west), Verwood (11 miles east), Gillingham (11 miles north-west), Shaftesbury (7 miles north-west) and Ferndown (12 miles south-east).
Local landmarks in Tarrant Gunville
Our clients here include homes close to Church of St Mary and the streets around them. Nearby you’ll also find Pitt Rivers Museum (Farnham) (2.5 miles north-east) and Blandford Community Hospital (4.5 miles south-west). Not far away are Hod Hill.
Bath re-enamelling in Tarrant Gunville without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Whether it’s thin, worn enamel in places and a bath in a colour that no longer suits, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Tarrant Gunville (DT11)
- County
- Dorset
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
When to call us in Tarrant Gunville
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Questions to ask before you book
- How changes to the job are handled
- How long the guarantee is and what it covers
- If travel is included in the price
- Whether the price is fixed and includes VAT
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take the best part of a day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Ask for a price
If you are in Tarrant Gunville and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
What we can’t put right
Some jobs aren’t right for a repair, including:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Towns and villages near Tarrant Gunville
More services for Tarrant Gunville
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
FAQs for Tarrant Gunville
How long will the bath be out of use?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Can you quote from photos?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens after I send photos?
We come back with a fixed quote. There’s no obligation to book.
What affects the price in Tarrant Gunville
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The type of damage
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- How many areas need work
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Most quotes are done from photos alone. To make it quick:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Where you are, by postcode
- Any details about the material
Send us a picture of the damage and one of the whole item, with your DT11 postcode, and we will reply with a fixed quote.
How to look after the repair
Once the work has cured, treat it gently:
- Have chips seen to early
- Fix dripping taps quickly
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
