Solihull · England
Bath re-enamelling & resurfacing in Temple Balsall, Solihull
Problem with your bath in Temple Balsall? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A roll-top that is seen better days

About our bath re-enamelling in Temple Balsall
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on Victorian roll-tops, cast iron baths and acrylic baths, and common reasons people contact us are chips and rust in more than one place and a coloured bath you want in white.
Every repair is covered by a one-year guarantee, wherever you are in Solihull.

- Where
- Temple Balsall (B93)
- Area hub
- Solihull
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- What kind of damage it is
- The material and finish
- Access to the area
- How hard the colour is to match
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- A close-up of the damage, in focus
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Towns and villages near Temple Balsall
What else we do in Temple Balsall
Aftercare tips
Most damage we see is avoidable. These habits help:
- Get any chip repaired quickly
- Store bottles off the bath
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common questions in Temple Balsall
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How do I get a price for bath re-enamelling in Temple Balsall?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Signs you need bath re-enamelling in Temple Balsall
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Contact us if you’ve noticed any of these:
- Several chips and rust patches
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Before you book anyone
- Whether the price is fixed and includes VAT
- How to care for the finish
- Whether the price covers travel
- How long the guarantee is and what it covers
Honest limits
It helps to know what we cannot do:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly before you book.
Materials we work on in Temple Balsall
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Where we work around Temple Balsall
Temple Balsall is about 4 miles south-east of Solihull, in Solihull. Wherever you are in the B93 postcode area, we carry out the work at your property. Temple Balsall is one of 33 towns and villages in Solihull where we work. You can also see our page for Birmingham, about 10 miles away.
Postcode districts we cover here: B93. We also cover the places around Temple Balsall: Oldwich Lane (1 mile south), Fen End (1 mile south-east), Chadwick End (2 miles south), Balsall Common (2 miles east) and Baddesley Clinton (2 miles south). Larger places within reach include Solihull (4 miles north-west), Monkspath (4 miles west), Elmdon Heath (4 miles north-west), Dorridge (3 miles west), Dickens Heath (6 miles west) and Widney Manor (3 miles west).
Around Temple Balsall
Locally, our jobs take us to homes close to Arden, St Mary's Church and Lady Katherine Leveson Church of England Primary School. The nearest railway station is Dorridge station, roughly 2.4 miles west. Nearby you’ll also find Catherine-de-Barnes Isolation Hospital (2.8 miles north-west) and Bickenhill Castle Hills Farm (4.2 miles north-west).
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Same prices wherever you are
- Typically one visit, start to finish
- We leave the room as we found it
- Work done at your home or business
Take a look at our prices page and resurfacing vs replacement cost guide.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
How the visit works
We work cleanly and quietly. We protect the area first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Getting a price
Most clients in Temple Balsall get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Landlord and trade work in Temple Balsall
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Temple Balsall, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.

