Warwickshire · England
Bath Re-enamelling for Meer End homes
Bath re-enamelling across Meer End and nearby, usually in one visit.
- Resurfacing from £350
- A coloured bath you want in white
- Worn patches where water runs and sits
What affects the price in Meer End
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The type of damage
- How many items we do on one visit
- The material and finish
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
Two or three clear photos are usually enough. It helps if you send:
- One sharp close-up of the damage
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Details of any past repairs
To get a price, send a couple of photos through our quote form or ring us. We will say immediately if a repair is the right fix.
Bath re-enamelling at your home in Meer End
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with wear marks under the taps and an outdated colour you’d like to change, we can help.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Where
- Meer End (CV8)
- Area hub
- Warwickshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Meer End
Other services in Meer End
Landlord and trade work in Meer End
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Get a quote
Most clients in Meer End get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Meer End
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Our work in Meer End
Meer End is about 3 miles north-west of Kenilworth, in Warwickshire. Across the CV8 area, we carry out the work at your property. Meer End is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 13 miles away.
Jobs in CV8 work the same way as everywhere else we cover. If you are just outside Meer End, we cover Honiley (1 mile south), Fen End (1 mile west), Balsall Common (2 miles north), Burton Green (2 miles north-east) and Wroxall (2 miles south-west). Within a short drive, we also cover Nuneaton (13 miles north-east), Warwick (7 miles south-east), Royal Leamington Spa (7 miles south-east), Stratford-upon-Avon (12 miles south), Bedworth (10 miles north-east) and Leamington Spa (7 miles south-east).
What’s near Meer End
Around Meer End, we work in homes near Heart of England School and the streets around them. The closest station to Meer End is Berkswell station, about 2 miles north of the centre. A little further out are Kenilworth Abbey Barn Museum (2.9 miles south-east) and Kenilworth Castle (2.5 miles south-east). For a walk, there is Oxpen Meadow Lake.
Common problems we fix in Meer End
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Contact us if you’ve noticed any of these:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How long it needs to cure
- Whether they match the colour on site
- How the room is protected while they work
- What the guarantee covers, and for how long
Common questions in Meer End
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and you’ll get one combined price.
Do you come to Meer End?
Yes. We cover the whole UK and come to Meer End and the rest of Warwickshire. Send us photos for a fixed quote, or call 0345 017 0787.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
