Surrey · England
Bath Re-enamelling for Thames Ditton homes
Full bath re-enamelling and resurfacing in Thames Ditton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Thames Ditton
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and the jobs we see most are enamel that’s lost its shine and feels rough and wear marks under the taps.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Thames Ditton (KT7)
- Area hub
- Surrey
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why choose Surface Doctor in Thames Ditton
- Work done at your home or business
- We leave the room as we found it
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or resurfacing vs replacement cost guide.
Also near Thames Ditton
Also in Thames Ditton
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Covering Thames Ditton
Thames Ditton is about 1 mile west of Surbiton, in Surrey. We travel to homes and businesses in Thames Ditton and nearby villages, so you don’t need to take anything anywhere. Thames Ditton is one of 395 towns and villages in Surrey we cover. We work right across the region, from Thames Ditton to London (13 miles away).
All of KT7 is covered, from the main roads to the quietest streets. Jobs here include addresses on High Street, Watts Road and Ditton Close. Thames Ditton is on the A307, which makes it straightforward to reach. Other places close to Thames Ditton include Weston Green (1 mile south-west), Long Ditton (1 mile east), Hinchley Wood (1 mile south), Seething Wells (1 mile east) and Molesey (1 mile north-west). Larger places within reach include Guildford (14 miles south-west), Woking (12 miles south-west), Epsom (5 miles south-east), Redhill (13 miles south-east), Ewell (4 miles south-east) and Egham (10 miles west).
What’s near Thames Ditton
We visit homes around George and Dragon pub, Thames Ditton Junior School and Shrewsbury House School, among other places. You’ll also find Church of St. Nicholas (under half a mile north), Esher College (0.5 miles west) and Giggs Hill Green (less than half a mile south). Thames Ditton has its own railway station: Thames Ditton station. Nearby you’ll also find Tolworth Hospital (2 miles east) and Bentall Centre (2 miles north-east). Green spaces nearby include The Wood and The Lake.
- Parks and local facilities nearby include Municipal Borough of Surbiton (1.8 miles south-east)
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Work for landlords and builders
If you manage property in Thames Ditton, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we are called out for in Thames Ditton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- Enamel that’s lost its shine and feels rough
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- Lots of chips and rust spots
What your quote should include
- What preparation is included
- Who turns up on the day
- How to look after the finish
- How long the guarantee is and what it covers
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Thames Ditton. What changes the price is:
- How many areas need work
- The material and finish
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- A picture taken from further back
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Thames Ditton: your questions answered
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
