Norfolk · England
Bath Re-enamelling in Themelthorpe
Damaged bath in Themelthorpe? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
Landlords, agents and businesses in Themelthorpe
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How we handle bath re-enamelling in Themelthorpe
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for worn patches where water runs and sits and staining under the taps and around the waste, across pressed steel baths, Victorian roll-tops and cast iron baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Themelthorpe (NR20)
- Area hub
- Norfolk
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take the best part of a day, tidy-up included.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Questions from Themelthorpe
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
How do I get a price for bath re-enamelling in Themelthorpe?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
What areas do you cover?
We cover the whole UK, including Themelthorpe and the rest of Norfolk. Send your postcode with your pictures and we’ll confirm dates.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What a repair can’t fix
A repair is not always the answer, and we would rather say so up front. We cannot fix:
- A bath that’s rusted through
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Themelthorpe
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Avoid suction-cup mats
- Store bottles off the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- Usually one visit, start to finish
- A fixed quote before you book
Take a look at our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The colour and finish to match
- How easy the damage is to reach
- What the surface is made of
- The type of damage
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Covering Themelthorpe
Themelthorpe is about 8 miles north-east of Dereham, in Norfolk. We travel to clients in Themelthorpe, so there is no workshop to go to. Our repair technicians cover all 797 towns and villages in Norfolk, from the larger towns to small villages.
Here we cover the NR20 postcode area. Nearby, we also work in Foulsham (2 miles west), Guestwick Green (2 miles north), Foxley (2 miles south-west), Kerdiston (2 miles east) and Bawdeswell (2 miles south). Larger places within reach include Norwich (14 miles south-east), Dereham (8 miles south-west), Wymondham (14 miles south), Sprowston (14 miles south-east), North Walsham (15 miles east) and Sheringham (13 miles north-east).
What’s near Themelthorpe
Typical jobs here are in homes near Church of St Andrew. Further afield, we also cover the area around Morley Castle (4.2 miles south-west). Open spaces near Themelthorpe include Foxley Wood.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Towns and villages near Themelthorpe
Other services in Themelthorpe
About our accreditations · Every repair comes with a one-year guarantee.
