Norfolk · England
Bath Re-enamelling for Sparham homes
Full bath re-enamelling and resurfacing for homes and businesses in Sparham and across Norfolk. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs right away
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our bath re-enamelling in Sparham
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and people most frequently call us about an original cast iron bath that needs restoring and wear marks under the taps.
Every job is backed for twelve months in Sparham and everywhere else. We return to put right any problem with the work.
- Location
- Sparham (NR9)
- Region
- Norfolk
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Sparham, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
Common problems we fix in Sparham
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Chips and rust in more than one place
Before booking anyone
- If travel is included in the price
- What protection goes down before work starts
- What happens if they find more damage
- The length of the guarantee and what it covers
FAQs for Sparham
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Can you quote from photos?
Nearly always. If pictures don’t show enough, we will ask for another angle.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Covering Sparham
Sparham is about 6 miles north-east of Dereham, in Norfolk. Customers in Sparham get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Sparham is one of 797 towns and villages in Norfolk where we work.
Every address in NR9 is within our area. Whether you live on The Street, Well Lane and Church Farm Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Lyng (1 mile south), Bawdeswell (1 mile north-west), Mill Street (2 miles south-west), Lyng Easthaugh (2 miles south-east) and Elsing (2 miles south-west). Within a short drive, we also cover Norwich (12 miles south-east), Dereham (6 miles south-west), Wymondham (11 miles south), Sprowston (12 miles south-east), Thorpe St Andrew (14 miles south-east) and Attleborough (15 miles south).
What’s near Sparham
Our clients here include homes close to Sparham Pools, Reepham High School and College and Lyng Church of England Primary School. A little further out are Morley Castle (2.8 miles south-west). Not far away are Foxley Wood.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day, and we will tell you if anything changes.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Advice
Nearby places to Sparham
Also in Sparham
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- What the surface is made of
- How much damage there is
- The colour and finish to match
- How many items we do on one visit
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Details of any past repairs
- One picture of the whole bath
- Any details about the material
- Something in shot to show the size
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Repair or replace in Sparham?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Sparham. The job itself decides the price: the material, the amount of damage and how many items.
Why Sparham clients choose us
- We come to you, anywhere in the UK
- Colour-matched on site
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
