West Berkshire · England
Bath Re-enamelling for Three Ashes homes
Bath re-enamelling for Three Ashes, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
What we’re called out for in Three Ashes
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
These are the problems we’re asked about most:
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Before you book anyone
- Whether there are any call-out or travel charges
- Aftercare advice
- How long the guarantee is and what it covers
- How your room will be protected
Bath re-enamelling in Three Ashes without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s a peeling or bubbling previous coating and a roll-top that’s seen better days, we can generally put it right.
You get a one-year guarantee, the same in Three Ashes as everywhere else we work.
- Location
- Three Ashes (RG7)
- Region
- West Berkshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Three Ashes and nearby
Three Ashes is about 3 miles east of Tadley, in West Berkshire. Customers in Three Ashes get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We work in 155 places in West Berkshire, from the larger towns to small villages. We work right across the region, from Three Ashes to London (about 44 miles away).
Here we cover the RG7 postcode area. We also cover the places around Three Ashes: Bramley (1 mile south-east), Mortimer West End (2 miles north), West End Green (2 miles east), Mortimer (2 miles north) and Bramley Green (2 miles south-east). Further out, we also cover Newbury (11 miles west), Thatcham (8 miles north-west), Burghfield Common (4 miles north), Speenhamland (11 miles west), Spencers Wood (6 miles north-east) and Calcot (7 miles north).
Near you in Three Ashes
Our clients here include homes close to Silchester Church of England Primary School and Church of St. Mary and the streets around them. Three Ashes’s nearest station is Bramley (Hants) station, roughly 1.5 miles south-east. Other landmarks nearby include Calleva Museum (0.9 miles north-west) and Basingstoke and North Hampshire Hospital (4.8 miles south). Open spaces near Three Ashes include Daneshill Park Woods.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Also near Three Ashes
More services for Three Ashes
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The material and finish
- The size and number of damaged areas
- Access to the area
- How hard the colour is to match
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- One sharp close-up of the damage
Upload a photo of the damage and a wider shot of the entire item, with your RG7 postcode, and we will come back with a fixed quote.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we do, step by step
Arrival times are agreed in advance. On site, it takes a full day for most jobs. The room is left tidy and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Clear the area around the damage
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Getting a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
FAQs for Three Ashes
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your photos and you’ll get one combined price.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
What areas do you cover?
The entire UK, including all of West Berkshire. Send your postcode with your photos and we’ll confirm dates.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Are there extra charges for Three Ashes?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Do you come to Three Ashes?
Yes, we do. We send a technician to Three Ashes for every job, and the price is the same as everywhere else.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
About our accreditations · Every repair comes with a one-year guarantee.
