Norfolk · England
Bath re-enamelling & resurfacing in Thurning, Norfolk
Bath re-enamelling in and around Thurning: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Thurning
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on pressed steel baths, acrylic baths and basins & shower trays, and the jobs we see most are wear marks under the taps and a period or roll-top bath worth keeping.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Thurning (NR20)
- County
- Norfolk
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Thurning
How much does bath re-enamelling cost in Thurning?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
What areas do you cover?
Across the UK, and that includes Thurning. Our prices are the same everywhere.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Our work in Thurning
Thurning is about 10 miles south-west of Sheringham, in Norfolk. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Thurning is one of 797 places in Norfolk we cover.
Our technicians cover all of NR20. Close by, we cover Wood Dalling (2 miles south), Nethergate (2 miles west), Guestwick (2 miles south-west), Briston (2 miles north-west) and Hindolveston (3 miles west). Further out, we also cover Norwich (15 miles south-east), Dereham (12 miles south-west), Sprowston (15 miles south-east), North Walsham (13 miles east), Sheringham (10 miles north-east) and Taverham (11 miles south-east).
Landmarks near Thurning
Locally, our jobs take us to homes close to Church of St Andrew and the streets around them. A little further out are Hunworth Castle Hill (3.6 miles north). For a walk, there is Foxley Wood.
Common problems we fix in Thurning
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Send us a photo if you notice any of these:
- Enamel that is lost its shine and feels rough
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
Comparing quotes
- The length of the guarantee and what it covers
- How changes to the job are handled
- What aftercare is recommended
- A fixed quote, and whether VAT is included
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Places near Thurning
More services for Thurning
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Let us know about parking or access
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Advice
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- A bath split right through the body
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Thurning as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Most jobs done in one visit
- Dust sheets down, tidy finish
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
