East Sussex · England
Bath Re-enamelling in Tile Hurst
Bath re-enamelling across Tile Hurst and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Our work in Tile Hurst
Tile Hurst is about 1 mile north-west of Hailsham, in East Sussex. We visit customers in Tile Hurst and the surrounding area, so there’s no workshop to go to. We work in 289 places in East Sussex, from the larger towns to small villages. We work right across the region, from Tile Hurst to London (about 46 miles away).
Postcode districts we cover here: BN27. Nearby, we also work in Lower Horsebridge (1 mile north), Hailsham (1 mile south-east), Upper Horsebridge (1 mile north-east), Lower Dicker (1 mile north-west) and Hellingly (1 mile north-east). Further out, we also cover Eastbourne (6 miles south), Hastings (14 miles east), Bexhill-on-Sea (10 miles east), Seaford (9 miles south-west), Lewes (10 miles west) and Crowborough (13 miles north).
What’s near Tile Hurst
In Tile Hurst, that means homes near The Grenadier pub, Grovelands Community Primary School and Bede's Prep School and the streets around them. Nearby too are Zoar Strict Baptist Chapel (0.8 miles north-west) and Hailsham Community College (0.9 miles east). For rail, the closest station is Polegate station, roughly 3.4 miles south of the centre. Other landmarks nearby include Herstmonceux Castle (4.5 miles east) and Hellingly Hospital Railway (1.6 miles north-east). Open spaces near Tile Hurst include Combe Hill.
Bath re-enamelling in Tile Hurst, done in place
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, with the bath ready to use the following day. We’re frequently asked to fix stains that won’t shift and an old resurfacing that’s failing, in cast iron baths, Victorian roll-tops and pressed steel baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Area
- Tile Hurst (BN27)
- County
- East Sussex
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
What we do, step by step
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes a full day, and we will tell you if anything changes.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Ensure the area is dry
- Open a window if you can
- Let us know if it has been repaired before
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
When to call us in Tile Hurst
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Contact us if you’ve noticed any of these:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
Comparing quotes
- Aftercare advice
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
Your questions about bath re-enamelling in Tile Hurst
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What areas do you cover?
Everywhere in the UK, Tile Hurst included. Travel is included in the price.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Also near Tile Hurst
More services for Tile Hurst
What affects the price in Tile Hurst
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Access to the area
- Whether we combine several jobs
- The material and finish
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Where you are, by postcode
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
What we cannot put right
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Tile Hurst
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Repair or replace in Tile Hurst?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Free fixed quotes from pictures
- Honest advice, even when it means no job
Take a look at our full price list and resurfacing vs replacement cost guide.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams in East Sussex and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
