Portsmouth · England
Bath re-enamelling & resurfacing in Tipner, Portsmouth
Bath re-enamelling in Tipner without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling in Tipner, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We are frequently asked to fix a roll-top that’s seen better days and a peeling or bubbling previous coating, in cast iron baths, acrylic baths and Victorian roll-tops.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Tipner (PO2)
- Region
- Portsmouth
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Tipner questions
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you quote from photos?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
What happens after I send photos?
You will get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Tipner and the surrounding area
Tipner is about 1 mile north-west of Portsmouth, in Portsmouth. Whether you’re in the middle of Tipner or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Tipner is one of 19 places in Portsmouth we cover. We work right across the region, from Tipner to London (about 64 miles away).
Every address in PO2 is covered, from the main roads to the quietest streets. Streets in the area include Knox Road, Croft Road and Whaley Road. You’ll find Tipner on the M275 and A2047, so it’s easy for us to reach. Close by, we cover North End (1 mile east), Rudmore (1 mile south-east), Portsmouth (1 mile south-east), Landport (1 mile south) and Hilsea (1 mile north-east).
Around Tipner
Typical jobs here are in homes near Mayfield School, St Edmund's Catholic School and Stamshaw Infant Academy. Other local landmarks include Mother Shipton pub (under half a mile north-east), St Saviour's Church (less than half a mile north-east) and Alexandra Park (0.6 miles north-east). The closest station to Tipner is Portsmouth & Southsea station, about 1.4 miles south of the centre. Further afield, we also cover the area around Royal Portsmouth Hospital (1.2 miles south) and Charles Dickens Birthplace Museum (0.8 miles south). For a walk, there’s Milton Locks and Portsdown Hill.
- Parks and local facilities nearby include Southsea (2.5 miles south)
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Have chips seen to early
- Store bottles off the bath
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Also in Tipner
Honest limits
Some jobs aren’t right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- A fixed quote before booking
- Colour-matched on site
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
Read our prices page and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Tipner
Often the bath has just had decades of use. The body of the bath is usually perfectly sound.
The most common problems we’re called about are:
- A roll-top that is seen better days
- A coating lifting around the plughole
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Before booking anyone
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- How the colour is matched
- How long the guarantee is and what it covers
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow the best part of a day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Related advice
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- What kind of damage it is
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- Whether we combine several jobs
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- A clear, close picture of the problem area
- The material, if you know it
- Natural light rather than flash
- A coin or ruler next to the damage for scale
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
