South Gloucestershire · England
Bath Re-enamelling in Tockington
We travel to Tockington for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- An old resurfacing that is failing
Repairing versus replacing in Tockington
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Tockington clients choose us
- Colour-matched on site
- Everything repaired in place
- CHAS and Constructionline accredited
- Fixed prices from your photos
Take a look at our full price list and resurfacing vs replacement cost guide.
About our bath re-enamelling in Tockington
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s a coating lifting around the plughole and chips and rust in more than one place, we can help, whatever the material.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Tockington (BS32)
- County
- South Gloucestershire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Clear the area around the damage
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Tockington and the surrounding area
Tockington is about 3 miles north of Bradley Stoke, in South Gloucestershire. Whether you’re in the middle of Tockington or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 110 places across South Gloucestershire, from the larger towns to small villages. We work right across the region, from Tockington to Birmingham (about 68 miles away).
We work across the BS32 postcode area. Streets in the area include Manor Close, Lower Tockington Road and Washingpool Hill Road, and we cover them all. We also cover the places around Tockington: Olveston (1 mile north-west), Old Down (1 mile north-east), Woodhouse Down (1 mile south-east), Awkley (1 mile south-west) and Lower Hazel (1 mile north-east). Larger places within reach include Kingswood (9 miles south), Mangotsfield (7 miles south-east), Yate (7 miles east), Fishponds (7 miles south), Bradley Stoke (3 miles south) and Thornbury (3 miles north-east).
Landmarks near Tockington
We visit homes around Olveston Church of England Primary School, Marlwood School and The Swan pub, among other places. The nearest railway station is Pilning station, roughly 3 miles south-west. A little further out are Thornbury and District Museum (2.7 miles north-east) and The Mall (3.7 miles south). The countryside around Tockington includes Red Hill.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Your questions about bath re-enamelling in Tockington
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How much does bath re-enamelling cost in Tockington?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item with your BS32 postcode.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Nearby places to Tockington
Other services in Tockington
Do you need bath re-enamelling in Tockington?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Get in touch if you’ve noticed:
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- Several chips and rust patches
- A coating lifting around the plughole
What your quote should include
- What preparation is included
- If travel is included in the price
- Aftercare advice
- How the room is protected while they work
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What affects the price in Tockington
Resurfacing from £350. You will not pay by the hour. The price depends on:
- The material and finish
- The type of damage
- Access to the area
- Whether we combine several jobs
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
How to get a fixed quote
You can take the photos on your phone. Just ensure we can see:
- Any details about the material
- One picture of the entire bath
- A coin beside the damage so we can judge size
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
What we cannot put right
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Tockington
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
