Norfolk · England
Bath re-enamelling & resurfacing in Town Green, Norfolk
Local bath re-enamelling for Town Green: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
Bath re-enamelling in Town Green, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Typical jobs include a bath that stays dull however much you clean it and wear marks under the taps, in acrylic baths, basins & shower trays and Victorian roll-tops.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Town Green (NR11)
- Area hub
- Norfolk
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Town Green
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Are there extra charges for Town Green?
There’s no separate call-out charge. Your fixed price includes everything.
Do you work in Town Green?
Yes. We cover the whole UK and come to Town Green and the rest of Norfolk. Send us photos for a fixed quote, or call 0345 017 0787.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Nearby places to Town Green
More services for Town Green
Signs you need bath re-enamelling in Town Green
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Typical reasons for a call-out include:
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
Comparing quotes
- When it can be used again
- What preparation is included
- Whether a trained technician does the job
- A fixed price, and whether VAT is included
Our work in Town Green
Town Green is about 6 miles north-west of North Walsham, in Norfolk. Anywhere in NR11, a technician comes to you. Town Green is one of 797 towns and villages in Norfolk where we work.
Postcode districts we cover here: NR11. We also cover the places around Town Green: Alby Hill (1 mile north-west), Alby (1 mile south-east), Erpingham (1 mile south), Calthorpe (1 mile south-west) and Aldborough (1 mile north-west). Larger places within reach include Norwich (15 miles south), Sprowston (14 miles south), Thorpe St Andrew (15 miles south), North Walsham (6 miles south-east), Sheringham (6 miles north) and Norwich Lanes (15 miles south).
Around Town Green
Typical jobs here are in homes near Aldborough Primary School and Church of All Saints, among other places. Town Green’s nearest station is Gunton station, about 3.7 miles east of the centre. Nearby you will also find Cromer Hospital (5.3 miles north) and Bessingham Moat Yard (3.2 miles north-west).
Landlord and trade work in Town Green
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Repairing versus replacing in Town Green
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Town Green customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
Read our prices page or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- What the surface is made of
- Any earlier repairs that need removing first
- The type of damage
- How many areas need work
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- One sharp close-up of the damage
- The material, if you know it
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
