Warrington · England
Bath Re-enamelling for Town of Lowton homes
Bath re-enamelling across Town of Lowton and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
Bath re-enamelling in Town of Lowton, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include several chips and rust patches and an original cast iron bath that needs restoring, in acrylic baths, Victorian roll-tops and basins & shower trays.
Big or small, it’s backed by a one-year guarantee.
- Area
- Town of Lowton (WA3, WA12)
- Region
- Warrington
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Town of Lowton, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Town of Lowton
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Places near Town of Lowton
What else we do in Town of Lowton
What we are called out for in Town of Lowton
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Lots of chips and rust spots
- An outdated colour you’d like to change
What your quote should include
- What aftercare is recommended
- How the room is protected while they work
- How changes to the job are handled
- What the guarantee covers, and for how long
Repair or replace: which is better?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day. Prices start from £350. We charge the same wherever you are, with no extra for Town of Lowton. The job itself decides the price: the material, the amount of damage and how many items.
Why Town of Lowton customers choose us
- One-year guarantee on every repair
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
Take a look at our full price list or guide to resurfacing and replacement costs.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Your questions about bath re-enamelling in Town of Lowton
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover the entire of Warrington?
Everywhere in the UK, Town of Lowton included. Travel is included in the price.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
What happens if you find more damage?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Where we work around Town of Lowton
Town of Lowton is about 1 mile south-west of Golborne, in Warrington. We travel to customers in Town of Lowton and nearby villages, so there is no workshop to go to. We work in all 72 towns and villages across Warrington, from the larger towns to small villages. Our jobs stretch from Town of Lowton to Liverpool (14 miles away).
Our repair technicians cover all of WA3 and WA12 and the streets around it. Streets in the area include Newton Road, Lowton Gardens and Moss Lane, all of which we cover. Nearby, we also work in Lowton Heath (1 mile north-east), Lowton (1 mile north-east), Golborne (1 mile north-east), Kenyon (1 mile east) and Hermitage Green (1 mile south). We also work in nearby towns such as Warrington (4 miles south), Lymm (7 miles south-east), Fearnhead (4 miles south), Wilderspool (6 miles south), Orford (4 miles south) and Bruche (4 miles south).
Landmarks near Town of Lowton
Our customers here include homes close to St Peter's Church, Willow Park and St Luke's CofE Primary School and the streets around them. Nearby too are The Bulls Head pub (less than half a mile south-west) and Hope Academy (1.4 miles west). The nearest railway station is Newton-Le-Willows station, roughly 1 mile south-west. A little further out are Newton Community Hospital (2.1 miles south-west) and Golborne and Lowton West (1.4 miles north). Green spaces nearby include Highfield Moss and Pennington Flash.
Aftercare tips
So the finish stays in good condition for years:
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Never use suction bath mats
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Town of Lowton. The price reflects:
- How many items we do on one visit
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How much damage there is
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- Details of any past repairs
- Something in shot to show the size
- One picture of the entire bath
Upload a picture of the damage and one of the whole item, and tell us you’re in Town of Lowton, and we’ll reply with a fixed quote.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
